Table of Contents
Advertisement
ADCP-75-246 • Issue 1 • 6/2008
NOTE: SHOWN WITH DUST CAPS REMOVED
REF
USER INTERFACE
NO
1
No designation
2
Ground symbol
3
Antenna symbol
4
Network symbol
5
No designation
6
115/230 VAC
47–63 Hz
6.8 AMP
Page 4
© 2008, ADC Telecommunications, Inc.
TOP VIEW
(1) NETWORK LISTEN
ANTENNA CONNECTOR
Figure 2. 2x1 microBTS User Interface
Table 1. 2x1 microBTS User Interface
DESIGNATION
NMO female RF
connector
Threaded hole with
hex socket screw
N-type female RF
coaxial connector
Sealed RJ-45 female
connector
Red LED
(off/red)
Sealed 3-wire AC
power connector
(3) BASE STATION
ANTENNA
CONNECTOR
(6) AC POWER
DEVICE
Connection point for the Network Listen
antenna.
Connection point for the grounding wire.
Connection point for the base station antenna
cable.
Connection point for the IP backhaul cable.
Indicates if the microBTS is powered and normal
(off) or if a major fault is detected (red).
Connection point for the AC power cord.
BOTTOM VIEW
(4) IP BACKHAUL
(5) LED
CABLE CONNECTOR
INDICATOR
(2) GROUNDING WIRE
CONNECTOR
CONNECTION POINT
FUNCTIONAL
DESCRIPTION
22589-A
Advertisement
Table of Contents
