Philips AVENT SCF252 Manual

SCF252
ENGLISH
For your
child's safety
and health
WARNING!
Warning: Always use
this product under adult
supervision. Continuous
and prolonged sipping
of fluids will cause tooth
decay. Always check food
temperature before
feeding. Keep all items
not in use out of reach
of children. Do not heat
up any liquid or food
in the microwave. DO
NOT allow children to
play with small parts. DO
NOT allow children to
walk or run while they
use bottles or cups. The
spouts and the valves
are not suitable for hot,
fizzy or pulpy drinks.
DO NOT use cups
with spouts and valves
to mix infant formula as
this may cause liquids
to leak. Before use:
Inspect all items and
throw them away at
first sign of damage or
weakness. Clean the
replacement spout and
the valve before first use
(see section 'Cleaning').
Always ensure the valve
is properly assembled.
Cleaning: Clean the
replacement spout and
the valve after each
use to ensure optimal
hygiene.
1 Rinse the spout and
the valve thoroughly with
warm water. Caution: Do
not use abrasive cleaning
agents, antibacterial
cleaning agents or
chemical solvents.
Excessive concentration
of cleaning agents may
eventually cause the spout
to crack. If this occurs,
replace the spout and the
valve immediately.
2 Sterilise the spout and
the valve in a steriliser or
boiling water for max.
5 minutes. The
replacement spout
and the valve is also
suitable for all standard
sterilisation methods.
Note: Wash your hands
thoroughly and make sure
surfaces are clean before
contact with sterilised
items. Do not sterilise any
part of the spout cup in
the microwave without
using a microwave
steriliser .
3 After sterilisation, let
the spout and the valve
cool down for 5 minutes.
The spout and the valve
is dishwasher-safe, food
colourings may discolour
parts.
Register your product
and get support at
www.philips.com/
welcome