Philips AVENT SCF252 Manual

SCF252
ENGLISH (USA)
For your child's safety and health WARNING!
Warning: Always use this product under adult supervision.
Continuous and prolonged sipping of fluids will cause tooth
decay. Always check food temperature before feeding. Keep
all items not in use out of reach of children. Do not heat up
any liquid or food in the microwave. DO NOT allow children
to play with small parts. DO NOT allow children to walk
or run while they use bottles or cups. The spouts are not
suitable for hot, fizzy or pulpy drinks. DO NOT use cups with
spouts to mix infant formula as this may cause liquids to leak.
Before use: Inspect all items and throw them away at first
sign of damage or weakness. Clean the replacement spout
before first use (see section 'Cleaning'). Cleaning: Clean the
replacement spout after each use to ensure optimal hygiene.
1 Rinse the spout thoroughly with warm water. Caution: Do
not use abrasive cleaning agents, antibacterial cleaning agents
or chemical solvents. Excessive concentration of cleaning agents
may eventually cause the spout to crack. If this occurs, replace
the spout immediately. 2 Sterilize the spout in a sterilizer or
boiling water for max. 5 minutes. The replacement spout
is also suitable for all standard sterilization methods. Note:
Wash your hands thoroughly and make sure surfaces are clean
before contact with sterilized items. Do not sterilize any part of
the spout cup in the microwave without using a microwave
sterilizer. 3 After sterilization, let the spout cool down for
5 minutes. The spout is dishwasher-safe, food colorings
may discolor parts.