Samsung SyncMaster 591v Owner's Manual page 18

General
Connect the power cord for your monitor to the power port on the back of the monitor.
1.
Plug the power cord for the monitor into a nearby outlet.
Connecting to a computer
2-1.
Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
2-2. Connecting to a new Macintosh
Connect the monitor to the Macintosh computer using the D-SUB connection cable.
Connecting to an old Macintosh
2-3.
Connect your monitor to the Macintosh using the adapter for Macintosh (sold separately).
3. Turn on your computer and monitor. If your monitor displays an image, installation is
complete.
BNC Connectors (Option)
SyncMaster 591s / 591v / 793s / 793v / 783DF / 793DF /
793MB / 795DF / 795MB / 797DF / 997DF
Setup-For Multimedia model | Multimedia Speaker Stand
General | BNC Connectors (Option)