Sarstedt Microvette 100 ml User Manual

Microvette
User Guide
3
5
®
100/200
1.
1
2.
2
3.
4
4.
5.
6
6.
All patient blood specimens should be
treated with standard precautions.
Collect blood with the assembled
End-to-End 100 μl or 200 μl capillary.
For collection, best results are achieved
if the Microvette ® is held in horizontal or
slightly inclined position.
During blood collection, hold the capillary
3 to 5 mm away from the puncture site.
Collection is complete when the
End-to-End capillary is entirely filled
with blood.
Hold the tube upright to allow the blood
to flow from the capillary into the
Microvette ® .
Turn the cap to remove and discard the
preassembled capillary as one unit.
Remove the cap from the base and seal
®
the Microvette ('click' position).
Mix sample thoroughly by inverting
®
the Microvette .
Wear gloves!