Important Notes; Setup; Connection - Akai MPC X User Manual

Important Notes

Read the included safety & warranty manual before using your MPC hardware.
Before getting started and connecting devices to your MPC hardware or turning the hardware on/off, make sure all
devices are switched off.
To use your MPC hardware in Controller Mode (to control the MPC software):
Before installing the MPC software, make sure your computer meets the system requirements described at
akaipro.com. This applies whether you'll use MPC software as your host software or as a plugin in another digital
audio workstation (DAW).
Before connecting your MPC hardware to your computer, install the drivers and software. Visit
download the latest versions. Refer to the

Setup

1. Connection

Here is just an example of how to use MPC X in your setup. Items not listed under Introduction > Box Contents of
your included quickstart guide are sold separately.
Headphones
(to front-panel headphone output)
Microphone
2. Installation
section for more information.
Footswitch
(to front-panel FS1 input)
SD Card
(to front-panel SD card slot)
Turntable
Powered Monitors
akaipro.com
Computer
USB
drive
Power
to
7