Pad Mute Mode - Akai MPC X User Manual

Pad Mute Mode

Pad Mute Mode lets you easily mute pads within a program or set mute groups for each pad
within a program.
To enter Pad Mute Mode, do either of the following:
•
Press Menu, and then tap Pad Mute.
• Press Shift+Track Mute/Pad Mute (MPC X).
There are two tabs you can view in this mode: Pad Mute or Pad Group. Tap each button in the lower-left corner to
select it. See the following
Use the Program field at the top of the screen to select a program.
The time counter in the upper-right corner the current playhead position. This is shown in most of the modes. See
General Features > Time Counter/Locate
The automation button indicates the global automation state. This is shown in several modes. See
> Automation
to learn about this.
Time Correct lets you quantize pad mutes. This is useful when you want your mutes to line up with a specific time
division. For example, with Time Division set to 1 Bar, your mutes will always align with the beginning of the measure
immediately after you press the pad.
Tap Time Division at the bottom of the screen, and select a value from 1/16 to 2 Bars (T indicates a triplet-
based time division).
Tap TC at the bottom of the screen to enable or disable the Time Correct feature.
Pad Mute and Pad Group
to learn about this.
sections to learn about each.
General Features
263