Touchscreen - Akai MPC X User Manual

Touchscreen

Here is some general information about how to use the MPC X touchscreen:
Tap a button or option to select it. Use the data dial or
–/+ buttons to change its setting or value
Spread two fingers to zoom in (into a section of a
waveform, for example). Pinch two fingers to zoom out.
Double-tap a button to access advanced editing options.
In some cases, this will show a numeric keypad that you
can use to enter a value (an alternative to the data dial
or –/+ buttons). Tap the upper-left part of the screen to
return to the previous view.
The top of the screen shows the toolbar, which contains
information about the current view (often the name of
the current track, sequence, audio pointer position,
etc.). Tap an item to select it.
The bottom of the screen shows various buttons that
you can use in the current view. Tap a button to press it.
To return to a previous view, either tap outside of the
window currently on the screen or tap the left arrow ( )
in the upper-left part of the screen.
2
x
14