Samsung SyncMaster 210T Owner's Instructions Manual page 24

Table 3. Troubleshooting – Image ( Continued )
What you see...
Screen is blank and
power indicator light
is steady amber or
blinks every 0.5 or 1
seconds
Image is not stable
and may appear to
vibrate
Image is not centered
on the screen.
You need the monitor
driver software
Appendix
Suggested Actions
The monitor is using its power
management system.
Move the computer's mouse or
press a key on the keyboard
Check that the display resolution
and frequency from your PC or video
board is an available mode for your
monitor. On your computer check:
Control Panel, Display, Settings
If the setting is not correct, use your
computer utility program to change
the display settings.
NOTE: Your monitor supports multiscan display functions within
the following frequency domain:
Horizontal frequency:
Vertical frequency:
Maximum refresh rate:
Adjust the horizontal and vertical
position.
Download the driver from WWW pages:
http://www.samsung-monitor.com
http://www.samsungmonitor.com (USA only)
English
Power Saver, page 20.
Display Modes, page 25.
Installing the Video
Driver, page 6.
Analog: 30 kHz ~ 93 kHz
Digital: 30 kHz ~ 81 kHz
30 ~ 85 Hz
210T: 1600 x 1200
240T: 1920 x 1200
H-Position, page 13.
V-Position, page 13.
22
Reference