Samsung 214T Service Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Monitor
  5. 214T - SyncMaster - 21.3" LCD Monitor
  6. Service manual

Samsung 214T Service Manual

Samsung 214t lcd-monitor service manual
Hide thumbs Also See for 214T:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual , User Manual
SERVICE
LCD Monitor
LCD-Monitor
Chassis
LS21BRBS
Model
214T
Manual
Fashion Feature
- Applying MFM UI
- Applying Magic Color Pro
- Applying HDCP / PIP
- Supporting Magic Tune 4.0
- Supporting Analog / Digital / Video / S-video

Advertisement

Table of Contents
loading

Related Manuals for Samsung 214T

Summary of Contents for Samsung 214T

  • Page 1: Service Manual

    LCD-Monitor Chassis LS21BRBS Model 214T SERVICE Manual LCD Monitor Fashion Feature - Applying MFM UI - Applying Magic Color Pro - Applying HDCP / PIP - Supporting Magic Tune 4.0 - Supporting Analog / Digital / Video / S-video...
  • Page 2 Samsung Electronics Co.,Ltd. -This Service Manual is a property of Samsung 416, Maetan-3Dong, Yeongtong-Gu, Suwon City, Electronics Co., Ltd. Gyeonggi-Do, Korea, 443-742 Any unauthorized use of Manual can be punished Printed in Korea under applicable International and/or domestic P/N : BN82-00133T-00 law.

  • Page 3: Safety Precautions

    1 Precautions 1 Precautions Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock. 1-1 Safety Precautions 1-1-1 Warnings For continued safety, do not attempt to modify the circuit board. Disconnect the AC power and DC power jack before servicing.

  • Page 4: General Servicing Precautions

    1 Precautions 1-2 Servicing Precautions WARNING: An electrolytic capacitor installed with the wrong polarity might explode. Caution: Before servicing units covered by this service manual, read and follow the Safety Precautions section of this manual. Note: If unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions, always follow the safety precautions.

  • Page 5: Installation Precautions

    1 Precautions 1-4 Installation Precautions 1. For safety reasons, more than two people are 6. Keep the antenna far away from any high-voltage required for carrying the product. cables and install it firmly. Contact with the highvoltage cable or the antenna falling over may 2.
  • Page 6 1 Precautions Memo...

  • Page 7: Fashion Feature

    2 Product Specifications 2 Product Specifications 2-1 Fashion Feature - Support Analog, Digital, Video, S-Video - Improved Response Time by Adopting 16ms - Support Magic Color Pro Magic Color, Color Tone, Gamma, 6-Color, Color Weakness - Support PIP when the sources are Anaolg and Digital - Magic Bright : 4steps used Test, Internet, Entertain.
  • Page 8 2 Product Specifications 2-3 LS21BRBS feature Feature Feature Operating method If Brahms turns on in some resolution for the first time, it can execute Auto Auto Auto adjustment automatically for the high Quality Auto Power Brahms can check the change of Source on/off Automatically and change the source to the active Input Brahms supports Wall mount...

  • Page 9: Spec Comparison

    2 Product Specifications 2-4 Spec Comparison...
  • Page 10 2 Product Specifications 2-5 Spec Comparison to the Other Models...

  • Page 11: Option Specification

    2 Product Specifications 2-6 Option Specification Item Item Name CODE.NO Remark Quick Setup Guide BH68-00376L Warranty Card BH68-00261F (Not available in all locations) User's Guide, Monitor Driver, BN59-00395P Natural Color software, MagicTune software D-Sub(15 Pin) 3701-001219 Cable Power Cord 3903-000085 DVI Cable BN39-00246F...
  • Page 12 2 Product Specifications Memo...

  • Page 13: Alignments And Adjustments

    3 Alignments and Adjustments 3 Alignments and Adjustments This section of the service manual explains how to use the RS232 JIG. This function is needed for AD board change and program memory (IC200) change. 3-1 Required Equipment The following equipment is necessary for adjusting the monitor: Computer with Windows 95, Windows 98, Windows NT, Windows 2000, or Windows XP.

  • Page 14: Service Function Spec

    3 Alignments and Adjustments 3-6 Service Function Spec. 3-6-1 How to Display Service Function OSD 1. The OSD is displayed just like in 3-2. 2. To exit the service function, press the POWER key and restart the Monitor. Figure 2. The example of service function OSD 3-6-2 How to Control Service Function OSD Use the buttons to select an item that you want and press the Enter button.

  • Page 15: Hidden Key List

    3 Alignments and Adjustments 3-7 Hidden Key list...
  • Page 16 3 Alignments and Adjustments...

  • Page 17: Edid Installation With Windows Program

    3 Alignments and Adjustments 3-8 EDID Installation with Windows Program 1. Execute "WinDDC.exe" 2. Click "Sys Config" Select "Station : Write station" Check "Serial No and Week : Don't change" Click "Save" 3. Click "Open" icon. Select "Connected Port #1" and Next "OK". * File Name - SM214TA1.DDC : Analog - SM214TD1.DDC : Digital Press enter key on your keyboard.
  • Page 18 3 Alignments and Adjustments Memo...

  • Page 19: Troubleshooting

    4 Troubleshooting 4 Troubleshooting Notes: 1. Before troubleshooting, setup the PC's display as below. - Resolution: 1600 x 1200 - H-frequency: 75 kHz - V-frequency: 60 Hz 2. If no picture appears, make sure the power cord is correctly connected. 3.

  • Page 20: No Video (Analog)

    4 Troubleshooting 4-2 No Video (ANALOG) Check signal cable connection and power. X201 oscillate properly? Replace or check related circuit. Is there R, G, B input at Check input part. R104, R105 and R106? Is there Hsync, Vsync waveform Check input part. at R112, R113? Is there Hsync, Vsync waveform Check IC201 and related circuit.
  • Page 21 4 Troubleshooting WAVEFORMS...

  • Page 22: No Video (Digital)

    4 Troubleshooting 4-3 No Video (DIGITAL) Check signal cable connection and power. Replace or check related circuit. X201 oscillate properly? Is there input data at Check input part. R133, R134, R135, R136, R137 and R138? Is there waveform Check input part. at R139, R140? Is there R, G, B input at R134, Check Panel Cable.
  • Page 23 4 Troubleshooting WAVEFORMS...
  • Page 24 4 Troubleshooting 4-4 No Picture (Video Signal) Does a signal appear at Check CN103 and related circuit. Pin 3 of CN103? Does a signal appear at Check IC402 and related circuit. Pin 38 of IC402? Does a signal appear at Pin 234~237 and 241~244 Check IC201 and related circuit.
  • Page 25 4 Troubleshooting WAVEFORMS...
  • Page 26 4 Troubleshooting 4-5 No Picture (S-Video Signal) Does a signal appear at Check CN104 and related circuit. Pin 4 and 5 of CN104? Does a signal appear at Check IC402 and related circuit. Pin 36 and 42 of IC402? Does a signal appear at Pin 234~237 and 241~244 Check IC201 and related circuit.
  • Page 27 4 Troubleshooting WAVEFORMS...
  • Page 28 4 Troubleshooting R525 CN602 CN501 IC501 X201 IC201 IC402 R133,R134,R135,R136, R137,R138,R139,R140 R104, R105, R106 CN104 IC103 4-10...
  • Page 29 4 Troubleshooting R112, R113 4-11...

  • Page 30: Exploded View And Parts List

    5 Exploded View & Parts List 5 Exploded View and Parts List -You can search for updated part codes through ITSELF web site. URL : http://itself. sec. samsung.co.kr M0001 M0215 M0107 M0112 M0020 M0002 M0174 M0003...
  • Page 31 5 Exploded View & Parts List Location.No CODE-NO SPECIFICATION & DESCRIPTION Q'TY REMARK M0003 BN96-02171C ASSY STAND P;214T,GR70,SVM-1148 M0002 BN90-00781J ASSY COVER REAR;LS21BRBAS/XAA M0001 BN90-00794D ASSY COVER FRONT;LS21BRBAS/XAA M0003 BN96-02171C ASSY STAND P;214T,GR70,SVM-1148 M0002 BN90-00781J ASSY COVER REAR;LS21BRBAS/XAA M0112 BN96-02217A ASSY SHIELD P-PCB;214T,SECC...

  • Page 32: Electrical Parts List

    BN90-00781J ASSY COVER REAR;LS21BRBAS/XAA S.N.A M0081 6003-000337 SCREW-TAPTITE;BH,+,S,M4,L10,ZPC(BLK),SWR M0006 BN63-02056A COVER-REAR;214T,ABS,T2.8,HB,SRPAY M0001 BN90-00794D ASSY COVER FRONT;LS21BRBAS/XAA S.N.A T0003 BN96-02218A ASSY COVER P-FRONT;214T,ABS+HB ...3 M0112 BN63-02055A COVER-FRONT;214T,ABS,T2.8,HB,SRPAY S.N.A ...3 T0022 BN64-00380A KNOB CONTROL;BR20BS,ABS+PC,SPRAY, transp S.N.A ...3 M0020 BN96-02437A ASSY BOARD P;BRAHMS,SJ05-01-155,FUNCTION...
  • Page 33 6 Electrical Parts List Level Loc. No. Code No. Description & Specification Q'ty SA/SNA ..4 Q102 0501-002080 TR-SMALL SIGNAL;2SC2412K,NPN,200mW,SC-59 ..4 Q103 0501-002080 TR-SMALL SIGNAL;2SC2412K,NPN,200mW,SC-59 ..4 Q501 0501-002080 TR-SMALL SIGNAL;2SC2412K,NPN,200mW,SC-59 ..4 Q502 0501-002080 TR-SMALL SIGNAL;2SC2412K,NPN,200mW,SC-59 ..4 Q503 0501-002080 TR-SMALL SIGNAL;2SC2412K,NPN,200mW,SC-59 ..4 Q504 0501-002080 TR-SMALL SIGNAL;2SC2412K,NPN,200mW,SC-59...
  • Page 34 6 Electrical Parts List Level Loc. No. Code No. Description & Specification Q'ty SA/SNA ..4 R381 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 ..4 R382 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 ..4 R384 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 ..4 R396 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 ..4 R397 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 ..4 R398 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 ..4 R399 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 ..4...
  • Page 35 6 Electrical Parts List Level Loc. No. Code No. Description & Specification Q'ty SA/SNA ..4 R141 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 ..4 R142 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 ..4 R204 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 ..4 R205 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 ..4 R217 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 ..4 R236 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 ..4 R406 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 ..4...
  • Page 36 6 Electrical Parts List Level Loc. No. Code No. Description & Specification Q'ty SA/SNA ..4 R647 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 ..4 R648 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 ..4 R650 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 ..4 R107 2007-000077 R-CHIP;470ohm,5%,1/10W,TP,1608 ..4 R505 2007-000077 R-CHIP;470ohm,5%,1/10W,TP,1608 ..4 R129 2007-000078 R-CHIP;1Kohm,5%,1/10W,TP,1608 ..4 R130 2007-000078 R-CHIP;1Kohm,5%,1/10W,TP,1608 ..4...
  • Page 37 6 Electrical Parts List Level Loc. No. Code No. Description & Specification Q'ty SA/SNA ..4 R349 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 ..4 R350 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 ..4 R387 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 ..4 R388 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 ..4 R389 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 ..4 R390 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 ..4 R391 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 ..4...
  • Page 38 6 Electrical Parts List Level Loc. No. Code No. Description & Specification Q'ty SA/SNA ..4 R218 2007-001134 R-CHIP;68ohm,5%,1/10W,TP,1608 ..4 R219 2007-001134 R-CHIP;68ohm,5%,1/10W,TP,1608 ..4 R221 2007-001134 R-CHIP;68ohm,5%,1/10W,TP,1608 ..4 R101 2007-001164 R-CHIP;75ohm,1%,1/10W,TP,1608 ..4 R102 2007-001164 R-CHIP;75ohm,1%,1/10W,TP,1608 ..4 R103 2007-001164 R-CHIP;75ohm,1%,1/10W,TP,1608 ..4 R401 2007-001164 R-CHIP;75ohm,1%,1/10W,TP,1608 ..4...
  • Page 39 6 Electrical Parts List Level Loc. No. Code No. Description & Specification Q'ty SA/SNA ..4 C342 2203-000189 C-CER,CHIP;100nF,+80-20%,25V,Y5V,1608 ..4 C343 2203-000189 C-CER,CHIP;100nF,+80-20%,25V,Y5V,1608 ..4 C345 2203-000189 C-CER,CHIP;100nF,+80-20%,25V,Y5V,1608 ..4 C348 2203-000189 C-CER,CHIP;100nF,+80-20%,25V,Y5V,1608 ..4 C349 2203-000189 C-CER,CHIP;100nF,+80-20%,25V,Y5V,1608 ..4 C350 2203-000189 C-CER,CHIP;100nF,+80-20%,25V,Y5V,1608 ..4 C351 2203-000189 C-CER,CHIP;100nF,+80-20%,25V,Y5V,1608 ..4...
  • Page 40 6 Electrical Parts List Level Loc. No. Code No. Description & Specification Q'ty SA/SNA ..4 C103 2203-000975 C-CER,CHIP;47nF,10%,25V,X7R,TP,1608,- ..4 C104 2203-000975 C-CER,CHIP;47nF,10%,25V,X7R,TP,1608,- ..4 C105 2203-000975 C-CER,CHIP;47nF,10%,25V,X7R,TP,1608,- ..4 C106 2203-000975 C-CER,CHIP;47nF,10%,25V,X7R,TP,1608,- ..4 C151 2203-005005 C-CER,CHIP;100nF,10%,16V,X7R,1608 ..4 C505 2203-005005 C-CER,CHIP;100nF,10%,16V,X7R,1608 ..4 C507 2203-005005 C-CER,CHIP;100nF,10%,16V,X7R,1608 ..4...
  • Page 41 6 Electrical Parts List Level Loc. No. Code No. Description & Specification Q'ty SA/SNA ..4 C347 2203-005437 C-CER,CHIP;10000nF,+80-20%,10V,Y5V,3216 ..4 C403 2203-005437 C-CER,CHIP;10000nF,+80-20%,10V,Y5V,3216 ..4 C407 2203-005437 C-CER,CHIP;10000nF,+80-20%,10V,Y5V,3216 ..4 C415 2203-005437 C-CER,CHIP;10000nF,+80-20%,10V,Y5V,3216 ..4 C538 2203-005437 C-CER,CHIP;10000nF,+80-20%,10V,Y5V,3216 ..4 C645 2203-005437 C-CER,CHIP;10000nF,+80-20%,10V,Y5V,3216 ..4 C646 2203-005437 C-CER,CHIP;10000nF,+80-20%,10V,Y5V,3216 ..4...
  • Page 42 CARD-11,BLOC WARRANTY;TFT LCD,BASIC,EU,M S.N.A ...3 ACCESSORY BH68-70448A CARD-01;TFT LCD,SRC,RUSSIA,S/W,120,W210* S.N.A ...3 T0059 BN68-00907A MANUAL-CARD;COMM,SAMSUNG,18 LANG,EUROPE, S.N.A ...3 M0215 BN96-00881V ASSY MANUAL P-IB+QSG;BRAHMS, 214T/244T,S S.N.A ..4 M0808 BH68-00376L MANUAL-04;LCDQUICK SETUP GUIDE,SYNCMASTE S.N.A ..4 BN59-00395V S/W DRIVER-00,IB;Bramas,241T/244T,W/W,Sy S.N.A M0003 BN92-01587A ASSY BOX;LS21BRBAS/EDC S.N.A BN69-01181A BOX-01,MONITOR;S/M214T(LS21BR),CB-SW4,YE...

  • Page 43: Block Diagram

    7 Block Diagrams 7 Block Diagram...

  • Page 44: Block Diagrams

    7 Block Diagrams...

  • Page 45: Wiring Diagram

    8 Wiring Diagram 8 Wiring Diagram...
  • Page 46 8 Wiring Diagram Memo...

  • Page 47: Schematic Diagrams

    9 Schematic Diagrams 9 Schematic Diagrams - This Document can not be used without Samsung s authorization. 9-1 Schematic Diagrams +5V_DDC_A R101 R102 R103 1/16W 1/16W 1/16W C101 47nF BD101 R+IN_A R104 +3.3V_MICOM +5V_DDC_D R119 R120 C102 47nF ZD104 1/16W...
  • Page 48 9 Schematic Diagrams 9-2 Schematic Diagrams VDD_MEM_2.5V VDDM_2.5 181mA C217 C218 C219 C220 C221 C222 C223 C209 C210 C211 C212 C213 C214 C215 C216 10nF 10nF 10nF 10nF 10nF 10nF 10nF address comm. option L201 47uF 100nF 100nF 100nF 100nF 100nF 100nF 100nF...
  • Page 49 9 Schematic Diagrams 9-3 Schematic Diagrams CN301 slcon8p U2082 TP520 TP524 TP521 DVCC_3.3V VCC_3.3V DVCC_3.3V VCC_3.3V 100mA 100mA L301 L302 TP522 3.3UH 3.3UH TP523 DVCC_3.3V PVDD_3.3V C301 C302 C303 C304 10uF 10nF 10uF 10nF DVDD_2.5V C361 FOR TEST VCC_3.3V 10nF DVCC_3.3V IC303 RESETN...
  • Page 50 9 Schematic Diagrams 9-4 Schematic Diagrams +3.3V_VIDEO IC403 +3.3V_VIDEO VDD3_DEC 74LCX14MX 93mA R412 TW9906_CLK_IN L401 3.3UH VDD25_DEC TW9906_CLK R413 60.3mA IC401 L402 LF25CDT 3.3UH C422 100nF C401 C402 MATERIAL 100uF 100nF VAA25_DEC RA401 RA402 46.8mA L403 3.3UH VDD25_DEC VDD3_DEC C423 100nF MATERIAL VD[1]...
  • Page 51 9 Schematic Diagrams 9-5 Schematic Diagrams +13V_IN IC501 AP1501-50K5A +5V_PANEL 1.37A GND2 OUTPUT L501 ST501 GND1 22uH C501 100uF C506 C507 100uF 100nF +3.3V_MICOM C502 C503 D501 C504 R501 C505 CN501 100nF 100nF SS24 100uF 100nF 4.7K slcon9p 1/16W R522 +5V_CENSOR U1945 BRT_CTL...
  • Page 52 9 Schematic Diagrams 9-6 Schematic Diagrams +1.8V_CM +1.8V_CMINT +3.3V_CM +3.3V_CMDRV 580mA 99mA C645 C643 ST603 100uF 10uF +1.8V_CMPLL +3.3V_CMPLL 128mA C644 C647 100uF 10uF +3.3V_CMRX +3.3V_CMRX +1.8V_CMINT 13mA ST604 C646 10uF +3.3V_CMDRV C609 C610 C611 C612 C613 C614 C615 +1.8V_CMINT C607 100nF 100nF...

  • Page 53: Operating Instructions And Installation

    10 Operating Instructions and Installation 10 Operating Instructions and Installation 10-1 Front 1. MENU button [ 2) Entertain : High brightness For watching motion - Opens the OSD menu. pictures such as a DVD or Video CD. Also use to exit the OSD menu or return to the previous menu.
  • Page 54 10 Operating Instructions and Installation 4) Custom Select this mode when you want to 5. AUTO button adjust the image according to your preferences. (Available in analog mode only) - When the 'AUTO' button is pressed, the Auto 3. Brightness button [ Adjustment screen appears as shown in the - When OSD is not on the screen, push the button animated screen on the center.
  • Page 55 10 Operating Instructions and Installation DVI port (Source : Digital) : Connect the DVI cable to the DVI port on the back of your monitor. D-sub 15-pin port :Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. VIDEO / S-VIDEO - VIDEO : External device (video) input terminal...
  • Page 56 10 Operating Instructions and Installation - Pivot Stand - Stand Height Adjustment 1. Press the top side of the stand and then push the button at the rear bottom of the stand. 2. You can adjust the stand height using this button. When you are using a stand height as maximum , it will go down a little bit from spring elasticity.

  • Page 57: Attaching A Base

    10 Operating Instructions and Installation 10-3 Using the Stand 10-3-1 Removing the base 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3.
  • Page 58 10 Operating Instructions and Installation A. Monitor B. Mounting interface pad 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3.

  • Page 59: Disassembly And Reassembly

    11 Disassembly and Reassembly 11 Disassembly and Reassembly This section of the service manual describes the disassembly and reassembly procedures for the LS21BRBS TFT-LCD monitors. WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling these components. 11-1 Disassembly Cautions: 1.
  • Page 60 11 Disassembly and Reassembly 3. Disconnect cable Main Board and Separate screw between Shield PCB and Bracket PCB.(2 point) 4. Separate screw Between Shield PCB and Panel. (4 point) and lift up the Shield. 5. Separate harness of the Panel with the IP Borad with the Main Board. 11-2 Reassembly Reassembly procedures are in the reverse order of disassembly procedures.
  • Page 61 12 PCB Daigram 12 PCB Diagram Input Voltage LVDS CONNECTOR CONNECTOR 1.8V 2.5V CM_LVDS Flash Memory Memory 3.3V MICOM SCALER 2.5V Video 2.5V Decoder 2.5V EEPROM S-VIDEO CONNECTOR C-VIDEO CONNECTOR DVI CONNECTOR D-SUB CONNECTOR Function CONNECTOR 12-1...
  • Page 62 12 PCB Diagram Memo 12-2...

  • Page 63: Circuit Descriptions

    13 Circuit Descriptions 13 Circuit Descriptions 13-1 Block description 13-1...

  • Page 64: Block Operating

    13 Circuit Descriptions 13-2 Block operating Feature Description Scaler Scaler Integrate ADC and TMDS, Scaling part Color management IC CM_LVDS This chip has Color adjust for color weakness , gamma adjustment, gray level color temperature compensation function DDR memory Save frame information that SCALER needed MEMORY VIDEO This chip receives video signal from the source and decodes signal to scaler needed...

  • Page 65: Reference Infomation

    14 Reference Infomation 14 Reference Infomation 14-1 Technical Terms - TFT-LCD - FINE "Fine" adjustment is used to adjust visibility by (Thin film Transistor Liquid Crystal Display) ADC(Analog to Digital Converter) control phase difference. This is a circuit that converts from analog signal to digital signals.
  • Page 66 14 Reference Infomation - Dot Pitch - External Device Input The image on a monitor is composed of red, green External device input refers to video input from and blue dots. The closer the dots, the higher the such external video devices as VCRs, camcorders resolution.
  • Page 67 14 Reference Infomation Connect the DC adapter for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.

  • Page 68: Connecting To Other Devices

    14 Reference Infomation 14-2 Connecting to Other devices - This monitor allows the user to connect it to such input devices as a DVD player, a VCR or a camcorder without disconnecting the PC. - The configuration at the back of the monitor may vary from product to product. 1) Connecting AV Devices - The monitor has AV connection terminals to connect AV input devices like DVD, VCR or Camcorder.

  • Page 69: Pin Assignments

    14 Reference Infomation 14-3 Pin Assignments Sync 15-Pin D-Sub Signal Cable Connector Type Separate Composite Sync-on-green Pin No. Green Green Green + H/V Sync. Blue Blue Blue DDC Return (GND) DDC Return (GND) DDC Return (GND) GND-R GND-R GND-R GND-G GND-G GND-G GND-B...

  • Page 70: Timing Chart

    14 Reference Infomation 14-4 Timing Chart - This section of the service manual describes the timing that the computer industry recognizes as standard for computer-generated video signals. Table 2-1 Timing Chart VESA Mode VGA2/ VGA3/ 640/75 Hz 800/60 Hz 800/75 Hz 1024/60Hz 1024/75Hz 1280/60Hz...

  • Page 71: Preset Timing Modes

    14 Reference Infomation 14-5 Preset Timing Modes - If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on.

  • Page 72: Panel Description

    14 Reference Infomation 14-6 Panel Description Maker VENDOR P/N PANEL_CODE PANEL_ABB STICKER_CODE Remarks LT140X1-002 BN07-00004A BN68-00239H LT150XS-L01 BN07-00009A LT150XS-L01-B BN07-00022A LTM150XS-L02 BN07-00005A LT181E2-132 BN07-00001A LT150XS-T01 BN07-00010A LTM181E3-132 BN07-00019A LT170E2-131 BN07-10001D LT181E2-131 BN07-10001E LTM170E4-L01 BN07-00018A LTM240W1-L01 BN07-00015A LTM213U3-L01 BN07-00016A LTM150XH-L01 BN07-00026A LTM150XH-L03 BN07-00027A LTM150XS-L01...
  • Page 73 14 Reference Infomation Maker VENDOR P/N PANEL_CODE PANEL_ABB STICKER_CODE Remarks LTA220W1-L01 BN07-00074B "Panel B-level panel code for 22"" TV Panel " LTA320W1-L01 BN07-00108A "Panel for AMLCD 32"" TV" LTM213U4-L01 BN07-00124A NARROW BEZEL 21 " PANEL LTM170E6-L04 BN07-00129A "HIGHLAND 17"" LOW PANEL (Panel only for TCO03)" LTM190E1-L01 BN07-00088A LTM190E1-L01 ZPD panel...
  • Page 74 14 Reference Infomation Maker VENDOR P/N PANEL_CODE PANEL_ABB STICKER_CODE Remarks CLAA150XG09 BN07-00141A "CPT 15"" Monitor new panel development" CLAA170EA02 BN07-00148A "17"" CPT NEW development panel" CLAA170EA02 BN07-00148B "17"" CPT ZPD panel code derivation" CLAA150XG09 BN07-00141B "CPT 15"" panel ZPD code derivation (GOYA-PJT)" CLAA150XP01 BN07-00173A CPT 15"...
  • Page 75 14 Reference Infomation Maker VENDOR P/N PANEL_CODE PANEL_ABB STICKER_CODE Remarks UNIPAC UM170E0 BN07-00028A Loaded by cisdba HYUNDAI HT15X13 BN07-00035A HYUNDAI HT17E11-200 BN07-00049A TN MODE HYUNDAI HT17E11-300 BN07-00093A HT17E11-300 ZPD panel HYUNDAI HT17E11-400 BN07-00094A HT17E11-400 normal panel HYUNDAI HT17E11-400 BN07-00095A HT17E11-400 ZPD panel code HYUNDAI HT17E12 BN07-00096A...
  • Page 76 14 Reference Infomation Memo 14-12...

Table of Contents