Samsung SyncMaster 210T Owner's Instructions Manual page 18

Adjusting Your LCD Monitor
Table 1. Screen controls ( Continued )
Menus and
Icon
Sub-menus
PIP(Picture-in-
Picture)
Size
n
Position
n
Function Descriptions
–
Shows a small sub-window superimposed on Video or
n
PC. (Refer to page 9.)
When Video is a full screen video source, then PC will
n
be appeared in a small window. Likewise, when PC is a
full screen video source, then Video will be appeared in
a small window.
The monitor remembers the previous state of Video
n
and PC. Thus if the previous state of PC was S-Video,
and currently PC video is displayed in full screen, then
S-Video will appear in the PIP window.
When powered on, PIP source is from DVI and Video is
n
from S-Video. If your PC connects Analog or Video
connects RCA, change source like below method.
When you touch SOURCE button when PIP feature is
n
active, PIP source will be changed from RCA or S-Video
to S-Video or RCA respectively, and from D-Sub or DVI
to DVI or D-Sub respectively.
Off: Disables PIP
1: 400 x 300
2: 640 x 480
3: 800 x 600
H-Position
n
Changes PIP window position to the horizontal direction.
V-Position
n
Changes PIP window position to the vertical direction.
English 16
+