Samsung SyncMaster 210T Owner's Instructions Manual page 15

Adjusting Your LCD Monitor
Table 1. Screen controls ( Continued )
Menus and
Icon
Sub-menus
Fine
n
Coarse
n
H-Position
V-Position
Color control
Mode 1
n
Mode 2
n
Mode 3
n
User Mode
n
Reset
n
Function Descriptions
–
Although "Auto Adjustment" automatically finds the
optimum values of FINE and COARSE parameters as well
as image position, it may be necessary for you to adjust
those parameters manually. It is recommended for you to
use "Auto Adjustment" first. If the adjustment results are
not satisfactory, then use COARSE and FINE adjustment
features to get the best adjustment results. Bear in mind
that COARSE and FINE adjustments may change the
width of the image and affect image position as well. If
the image is clear while out of center by a couple of
pixels, use image position to center the image.
Changes the location of the image.
n
In case of the image is off center, use this function to
n
center the image.
It work only with Analog source.
n
H-Position
n
"–" : Move to the LEFT
"+" : Move to the RIGHT
V-Position
n
"–" : Move to the Bottom
"+" : Move to the Top
The tone of color can be changed from bluish white to re-
dish white. The individual color components are also user
customizable.
Redish white.
Plain white.
Bluish white.
User customizable.
Color parameters are replaced with the factory default
values.
English 13
+