2in1 Max User Manual page 21

3. Gently massage from the base of the finger to the tip of the
finger to obtain the required blood volume. Avoid smearing
the drop of blood. For the greatest reduction in pain, lance
on the sides of the fingertips. Test immediately after a good
blood drop has formed.
4. Immediately touch the tip of the test strip to the drop of
blood. The blood pulled into the test strip through the tip.
Make sure that the blood sample has been fully filled the
check window on the strip tip. Hold the tip of the test strip
in the blood drop until the meter beeps.
Note:
If the blood sample does not fill the check window, do not add
a second drop. Discard the test strip and start over with a new
test strip.
5. The meter counts down 5 seconds and your result appears
on the display after a beep. The test result will automatically
be stored in the meter memory. Please do not touch the test
strip during the countdown as this may result in an error.
20