Omega HHF1001A Quick Start

WARRANTY/DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of defects
in materials and workmanship for a period of 13 months from
date of purchase. OMEGA's WARRANTY adds an additional one (1)
month grace period to the normal one (1) year product warranty
to cover handling and shipping time. This ensures that OMEGA's
customers receive maximum coverage on each product.
If the unit malfunctions, it must be returned to the factory for
evaluation. OMEGA's Customer Service Department will issue an
Authorized Return (AR) number immediately upon phone or written
request. Upon examination by OMEGA, if the unit is found to be
defective, it will be repaired or replaced at no charge. OMEGA's
WARRANTY does not apply to defects resulting from any action of
the purchaser, including but not limited to mishandling, improper
interfacing, operation outside of design limits, improper repair,
or unauthorized modification. This WARRANTY is VOID if the unit
shows evidence of having been tampered with or shows evidence of
having been damaged as a result of excessive corrosion; or current,
heat, moisture or vibration; improper specification; misapplication;
misuse or other operating conditions outside of OMEGA's control.
Components in which wear is not warranted, include but are not
limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its various
products. However, OMEGA neither assumes responsibility for
any omissions or errors nor assumes liability for any damages
that result from the use if its products in accordance with
information provided by OMEGA, either verbal or written.
OMEGA warrants only that the parts manufactured by the
company will be as specified and free of defects. OMEGA
MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF
ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT
THAT OF TITLE, AND ALL IMPLIED WARRANTIES INCLUDING
ANY WARRANTY OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.
LIMITATION OF LIABILITY: The remedies of purchaser set forth
herein are exclusive, and the total liability of OMEGA with
respect to this order, whether based on contract, warranty,
negligence, indemnification, strict liability or otherwise,
shall not exceed the purchase price of the component upon
which liability is based. In no event shall OMEGA be liable for
consequential, incidental or special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be used,
nor shall it be used: (1) as a "Basic Component" under 10 CFR 21 (NRC),
used in or with any nuclear installation or activity; or (2) in medical
applications or used on humans. Should any Product(s) be used in or
with any nuclear installation or activity, medical application, used on
humans, or misused in any way, OMEGA assumes no responsibility
as set forth in our basic WARRANTY/DISCLAIMER language, and,
additionally, purchaser will indemnify OMEGA and hold OMEGA
harmless from any liability or damage whatsoever arising out of the use
of the Product(s) in such a manner.
RETURN REQUESTS/INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA
Customer Service Department. BEFORE RETURNING ANY
PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN
AUTHORIZED RETURN (AR) NUMBER FROM OMEGA'S CUSTOMER
SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING
DELAYS). The assigned AR number should then be marked on the
outside of the return package and on any correspondence.
FOR WARRANTY RETURNS, FOR NON-WARRANTY REPAIRS,
consult OMEGA for current repair
please have the following
charges. Have the following
information available BEFORE
information available BEFORE
contacting OMEGA:
contacting OMEGA:
1. Purchase Order number under
1. Purchase Order number to
which the product was
cover the COST of the repair or
PURCHASED,
calibration,
2. Model and serial number of
2. Model and serial number of the
the product under warranty, and
product, and
3. Repair instructions and/or
3. Repair instructions and/or specific
specific problems relative to problems relative to the product.
the product.
OMEGA's policy is to make running changes, not model changes,
whenever an improvement is possible. This affords our customers
the latest in technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 2013 OMEGA ENGINEERING, INC. All rights reserved.
This document may not be copied, photocopied, reproduced,
translated, or reduced to any electronic medium or machine-readable
form, in whole or in part, without the prior written consent of OMEGA
ENGINEERING, INC.
MQS4979/0913
5
PRESS Km/h
PRESS
SET
MPH SET
°F °F
PRESS
REAL TIME MODE (MPH) REAL TIME MODE (Km/h)
SET
PRESS
PRESS
FPM
m/s SET
°F-°C
°F
°F
REAL TIME MODE (m/s) REAL TIME MODE
PRESS
MAIN MENU
MODE
MAX
FPM
°F
PRESS
MAXIMUM DISPLAY MODE WIRELESS TRANSMITTER UNIT
MODE
ID DISPLAY MODE
MIN
FPM
°F
PRESS
MINIMUM DISPLAY MODE TRANSMISSION INTERVAL
MODE
DISPLAY MODE
CFM
PRESS
MODE
VOLUME AIR FLOW MODE
WIRELESS RADIO DISPLAY MODE
FPM
PRESS SET PRESS
TO CHANGE HIGH
TO ENABLE/
DISABLE HIGH ALARM SET POINT
ALARM MODE
PRESS HAL PRESS
HIGH ALARM DISPLAY MODE AUTO POWER SHUT OFF
MODE
DISPLAY MODE
FPM
PRESS SET PRESS
TO CHANGE LOW
TO ENABLE/
DISABLE LOW ALARM SET POINT
ALARM
LAL
PRESS
ATMOSPHERIC PRESSURE
LOW ALARM DISPLAY MODE
DISPLAY MODE
MODE
MAX PRESS
m/s
MODE
PRESS
TO CHANGE RESPONSE
TIME
DISPLAY RESPONSE TIME MODE CROSS SECTIONAL
AREA DISPLAY MODE
Display Function Flow Chart
ARTWORK/PRODUCT ART/
DWGS/START HERE ARROW
PC Interface
The HHF1000 series comes with a Windows based user
application. This application runs on Windows XP,
Vista, and 7.
Operation
FPM • Install the user application.
• Connect the USB cable provided between the
°C
HHF1000 and the PC. For wireless version, make sure
the radio is turned off.
REAL TIME MODE (°C)
PRESS
• When the HHF1000 is connected to the PC for the first
MODE
time, the PC recognizes the unit and it looks for the
USB drivers. The necessary drivers are on the same
CD.
• The "found new hardware wizard" program will
PRESS
MODE
open. Select " Install from the specific location" option
and select the program CD where the drivers are
located.
• You are now ready to run the application. When the
PRESS
application is run, it establishes communication with
MODE
the HHF1000 meter, and a "Go" button will show up
on the Main window. Clicking the "Go" button will
PRESS SET
TO TURN ON/OFF start the data logging session.
THE RADIO
Wireless PC Communications
PRESS
The HHF1000 offers wireless PC communication on
MODE
some of its models (HHF1001x-W). The unit has a built-
SET
PRESS
in wireless module and it can transmit air velocity and
TO ENABLE/DISABLE
AUTO POWER
air temperature in real time to our UWTC-REC1 wireless
SHUT OFF
PRESS receiver. The UWTC-REC1 then sends the incoming data
MODE
to the PC. You can monitor and log the data from the
TC central software application. Refer to Section 5 of the
PRESS
TO CHANGE
User's Guide for complete and detailed information.
ATMOSPHERIC
PRESSURE
mmHg
PRESS
MODE
PRESS
TO CHANGE CROSS
SECTIONAL AREA
It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety
and EMC/EMI regulations that apply. OMEGA is constantly pursuing certification of
its products to the European New Approach Directives. OMEGA will add the CE
mark to every appropriate device upon certification.
The information contained in this document is believed to be correct, but
OMEGA accepts no liability for any errors it contains, and reserves the right to
alter specifications without notice.
WARNING: These products are not designed for use in, and should not be used
for, human applications.
6
For complete product manual:
www.omega.com/manuals/manualpdf/M4979.pdf
Handheld Air Velocity/Temperature
U.S.A.:
For Other Locations Visit omega.com/worldwide
HHF1000 SERIES
Meter With Wireless
PC Communication Option
®
omega.com info@omega.com
Servicing North America:
OMEGA Engineering, Inc., One Omega Dr.
P.O. Box 4047, Stamford, CT 06907-0047 USA
Toll-Free: 1-800-826-6342 (USA & Canada Only)
Customer Service: 1-800-622-2378 (USA & Canada Only)
Engineering Service: 1-800-872-9436 (USA & Canada Only)
Tel: (203) 359-1660 Fax: (203) 359-7700
e-mail: info@omega.com