Sound Settings; Ring Tone; (Menu 5.1); Ring Volume - Samsung TRI BAND SGH-P400 User Manual

Sound Settings

You can use the Sound Settings feature to
customise various settings, such as the:
• ring melody, volume and type.
• sounds made when you press a key, receive a
message, open/close the folder or switch your
phone on/off.
• alert tone made every minute during a call, when
you make an error or when your call is connected
to the system.
Note: When the phone is in Silent Mode (see
page 28), you cannot change the sound
settings.

Ring Tone

(Menu 5.1)

This menu allows you to select a ring melody.
You can choose between many different melodies.
Each time you select a melody, it plays for a few
seconds. If you have downloaded sounds from the
Internet or EasyGPRS programme, you can use
them in this menu.
When you select the Download more option, you
can access the t-zones portal by T-Mobile to
download melodies. The downloaded melody is
added to the list.
96

Ring Volume

(Menu 5.2)

This menu allows you to adjust the ring volume to
one of five levels.
Use the and keys or the volume keys on the
left side of the phone to increase or decrease the
volume.

Alert Type

(Menu 5.3)

This menu allows you to specify how you are to be
informed of incoming calls.
The following options are available:
Light Only: the service light flashes; the phone
neither rings nor vibrates.
Melody: the phone rings using the ring melody
selected in the Ring Tone menu (Menu 5.1); see
page 96.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.

Keypad Tone

(Menu 5.4)

This menu allows you to select a tone that the
phone sounds when you press a key.
To turn the sound off, select Off.
Sound Settings
97