Samsung TRI BAND SGH-P400 User Manual page 44

Picture Messages
• Preview: shows your message as it will
display on the recipient's phone.
Note: You can add text, an image and a sound
once for each page.
3. When the added content displays, press the
key to highlight Add Here.
4. Repeat steps 2 and 3 until you finish creating
your message.
5. If you want to change the added items, press
the or key to highlight one and press the
Options soft key. The following options are
available:
• Edit Text/Picture/Sound: allows you to
change text or replace the image or sound
with another one.
• Add Page: allows you to add more pages. You
can move to each page using the
when Page highlights on the message screen.
• Delete: deletes the item from your message.
• Duration: allows you to set how long text, an
image or a sound displays on the message
presentation screen. After a specified time, the
display scrolls to the next item and then
continues to the next page.
• Send: allows you to send the message.
• Save: saves the message in the Draft (Menu
2.3) or Templates (Menu 2.5) box for later
use.
• Settings: allows you to change the message
settings. For further details about each setting
options, see page 86.
• Add Destination: allows you to enter
destination addresses. See steps 7 to 12.
82
or key
• Preview: shows your message as it will
display on the recipient's phone.
Note: The options available are different
depending on the item you select on the
message screen.
6. When you are finished creating the message,
choose Send from the options and press the
Select soft key.
7. Select To, Cc or Bcc to enter a destination
number or address and press the Select soft
key.
8. Choose one of the following options and press
the Select soft key:
• Phone Number: allows you to enter the
phone number you want.
• E-Mail: allows you to enter the e-mail address
of the recipient to send the message as an
e-mail.
• Phone Book: allows you to retrieve a number
from your Phonebook.
9. Enter a number or an e-mail address, or select
a number in Phonebook.
10. When the correct number or address displays,
press the OK soft key.
11. To add a destination, press the Select soft key
when Add Destination highlights. Repeat from
step 8.
If you want to edit the destinations, select one
and press the Select soft key. You can change
or delete it.
12. When you are finished adding the destinations
to the type, press the C key or the
Picture Messages
soft key.
83