Additional Functions - Bosch WAX16161IN Instruction Manual

Display information, Option buttons
Display Information
wash: Not on if
flashing: too much detergent used
Rinse: Not on if
Spin: Not on if "
On: the door can be opened;
flashing (after programme starts): the door was not closed correctly
for programme status
On: childproof lock is activated;
flashing: the setting was changed
800 : Default spin speed of the programme
: Special symbol
1:30: Expected programme duration
24 h: Select Finish in time
: End of programme
Display Information
: : Fault displays
Display information
, : "YES" if the door can be opened or "NO" if it cannot be
depends on the
chosen programme opened during "Pause" period
Option buttons
Spin speed
You can change the indicated spin speed. The maximum spin speed which can be selected
depends on the chosen programme. You can also set "
Finish in time
Before a programme starts, you can specify by how many hours later the programme is to be
ended.
– Press button until the required number of hours is shown. The Finish in time can be set
in hour increments up to a maximum of 24 hours.
– Press Start/Soaking , the Finish in time starts counting down.
You can pause the programme to open the door even if the Finish in time is active.
Special symbol
– Except for the Spin/Empty
the load is held in the final rinsing water. When the programme has ended, "
Select programme Spin/Empty
laundry.
– When the Spin/Empty programme is selected, press the
programme is then defined as Empty; If "
– When the Empty programmes has ended, "
it means the whole process is finished.
Spin/Empty is selected
page 13
Spin/Empty is selected
" Rinse hold is selected
page 6
page 5 Special symbol
page 11
" Special symbol
programmes, press the button to set "
or directly press to select spin speed to spin the
button to set "
" is not set, the programme is defined as Spin.
" and " " appears on the display field,

Additional functions

Buttons for additional functions
Speed Wash
Rinse plus
Childproof lock
– Activating the childproof lock: After the programme starts, press Start/Soaking
down for 5 seconds until the
The symbol flashes if any setting is inadvertently changed.
– Deactivating the childproof lock: Press Start/Soaking
the symbol goes out.
– If the programme is ended or any setting is changed, deactivate the childproof lock.
– If the programme is changed while the childproof lock is activated, the
the programme which is running will continue.
– If the childproof lock is deactivated while the programme selector is in a different position
from when the childproof lock was activated, the programme which is currently running be
halted.
Soaking
Pour soaking agent/detergent into dispenser II according to the manufacturer's instructions.
Set programme selector to Cottons
10 minutes press Start/Soaking
re-press Start/Soaking
Signal
1. Start the signal
mode
2. Set volume for...
" (Rinse hold);
" appear.
", the
*If required, set the volume
repeatedly.
Sleep mode
If you do not operate the machine for about five minutes after selecting the programme or
programme end, the display information goes out to save power.
– If required, press any button, and all information will be displayed again.
5
In addition to the programme if required
Shorten the washing time. For slightly soiled items.
If the function is selected, programme duration and max. load will be
changed.
Additional rinse cycles,extended washing time.
For areas with very soft water or for further improvement of the rinsing
result.
Programme will not be changed by accidental operation.
symbol is displayed.
and hold down for 5 seconds until
Load washing of the same colour.
40 °C and select Start/Soaking
to stop the programme. After the required soaking time
, if the programme is to be continued or change the programme.
+
Set to Off Press and 1 step
hold and clockwise
Button feedback Information
signals signals
directly
set volume* 1 step set
clockwise
and hold
symbol flashes,
. After approx.
Release the
button to find
the number
volume* Set to Off
6