Connecting the cables
To install the monitor on your host system, please follow the steps below:
Turn off your computer and unplug your computer's power cord.
Connect the signal cable to the DP (optional) and/or HDMI (optional) input
socket of the monitor, and the DP (optional) and/or HDMI (optional) output
socket of the graphics card on the computer. Then tighten the thumbscrews on
the signal cable connector.
Connect the USB Cable(Optional)
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
Insert the monitor power cable into the power port at the back of the monitor.
Plug the power cords of your computer and your monitor into a nearby electrical
Audio output is only for audio output model. Please check user manual for
Charging USB devices just in DC on mode.
X27 User Guide English