Table of Contents
Advertisement
Connecting the cables
To install the monitor on your host system, please follow the steps below:
1.
Turn off your computer and unplug your computer's power cord.
2.
Connect the signal cable to the DP (optional) and/or HDMI (optional) input
socket of the monitor, and the DP (optional) and/or HDMI (optional) output
socket of the graphics card on the computer. Then tighten the thumbscrews on
the signal cable connector.
3.
USB 3.0 Type C-C Cable (Optional, USB Type-C-C input models only) Connect
one end of the USB 3.0 type C-C cable (optional) to your computer and connect
the other end to your electric devices. (5V/9V/15V/20V)
4.
Connect the USB Cable(Optional)
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
5.
Insert the monitor power cable into the power port at the back of the monitor.
6.
Plug the power cords of your computer and your monitor into a nearby electrical
outlet.
Note:
Audio output is only for audio output model. Please check user manual for more
instruction.
Mini DP
HDMI 1(2.0)
HDMI 2(2.0)
7
USB
DP
BM270 User Guide English
Advertisement
Table of Contents
