Air Considerations; Coolant Fill - Solid State Cooling Systems THERMOCUBE 200 Product Manual

T C 200/300/400 T
HERMO UBE
3.3 A C
IR ONSIDERATIONS
3.4 C F
OOLANT ILL
WARNING
Read the Coolant MSDS
Prior to filling the chiller
CAUTION
Use only recommended
coolants
S S C S , 167 M
OLID TATE OOLING YSTEMS
T : (845) 296-1300 F
ELEPHONE
C
HERMOELECTRIC HILLER
The air inlet and outlet are located on the left and right sides
respectively. Restricting airflow into or out of the unit will impair
performance. At least 3 inches of clearance is required on each side
to ensure adequate airflow.
An optional Air Filter is also available (see Section 7 for options).
The coolant fill cap is located at the top rear of the unit. Twist off
the cap counter-clockwise to open. Fill reservoir prior to starting
unit. Close cap before operating
Recommended Coolants:
Solid State Cooling Systems recommends using Koolance, a pre-
mixed 27% propylene glycol/water based coolant containing an
algaecide and corrosion inhibitors. Though it comes in several
colors, SSCS recommends the colorless or blue versions in 700 ml
bottles, part number: LIQ-702CL-B (clear) or LIQ-702B-B (blue),
as the dyes in the other colored versions can form small particulates
when not well mixed.
Contact Koolance for details:
Koolance USA
2840 West Valley Highway North
Auburn, WA 98001
(253) 893-7551
Water or ethylene glycol/water mixtures are also acceptable as
coolants.
Note that algae growth can occur when water is used without at
least 25% propylene or ethylene glycol.
C R , W
YERS ORNERS OAD APPINGERS
: (845) 296-1303 :
AX WEB WWW
M
ANUAL
F , NY 12590
ALLS
. .
SSCOOLING COM
52-11300-1
10
V M28
ERSION