Panasonic AK-HRP1000G Operating Instructions Manual page 6

Number
[POWER HEAD] button
[POWER VF] button
[BARS/TEST] button
[REF. RECALL] button
[AUTO WHITE] button
[AUTO BLACK] button
[AUTO SET UP] button
[CHARA] button
Front panel 1
[MATRIX] button
[SKIN DTL] button
[DRS] button
[B.GAMMA] button
[ASSIGN] button
[ASSIGN STATUS] button
Front panel 2 Buttons [1] to [5] (CONTROL/MODE)
[CONTROL/MODE] button
LCD panel
[MENU] dial
Front panel 3 [EXIT] button
[UNDO] button
[MENU] button
[ON] indicator (SCENE FILE)
Scene file page switching button
Front panel 4
[1/6], [2/7], [3/8], [4/EXT1], and [5/EXT2]
buttons (SCENE FILE)
[STORE] button
Part name
- 6 -
Connecting the Unit to AK-UB300G Series Cameras
✓ : Enabled
×: Disabled
×
×
✓
Only the ON/OFF for the color bar signal
output will function.
×
✓
✓
×
×
✓
✓
✓
Enabled starting with the following system
version.
AK-UB300G: V7.52-000-00.00
This unit: V4.40-00-0.00
✓
Enabled starting with the following system
version.
AK-UB300G: V7.52-000-00.00
This unit: V4.40-00-0.00
✓
✓
If a function that is not available on the
camera side is assigned, it will be displayed
in red in the top button display of the status
screen.
✓
If a function that is not available on the
camera side is assigned, it will be displayed
in red in the [ASSIGN] button display area of
the ASSIGN status screen.
✓
✓
✓
✓
✓
✓
✓
This indicator is off when a scene file is not
selected.
✓
✓
[EXT1] and [EXT2] are disabled.
×
Remarks