Connections - Panasonic AK-HRP1000G Operating Instructions Manual

Connections

Set the connection setting to [Serial(AW)] or [LAN(AW)] in the [CONNECT SETTING] menu.
When connecting, observe the following points.
Serial connection
Use a dedicated cable to connect the [CCU] connector of this unit to the <I/F> terminal of the AK-UB300G.
Use a PoE injector for the power supply.
LAN connection
Connect the [LAN] connector on this unit to the <LAN> connector on the AK-UB300G using a LAN cable (sold
separately).
This unit can be powered using PoE. Use a switching hub with PoE support.
Use a straight cable (category 5e or higher; up to 100 m (328.0 ft) in length) for the LAN cable (STP).
For details on switching hubs and PoE injectors that have been verified to support PoE, consult with your dealer.
Connecting the Unit to AK-UB300G Series Cameras
- 4 -