Rain Bird ESP-LX Installation, Programming, & User Manual page 41

The Valve Settings menu appears.
Press "4" on the Valve Settings menu.
The display shows Valve 1 and its current setting for Sensor
Override, either On or Off. The setting flashes.
To select a different valve, press "+" or "–" until the valve
number you want appears.
Depending on how this valve is currently set, either "On" or
"Off" flashes. To allow this valve to operate when a sensor is
active, press "On." To remove the sensor override from this
valve, press "Off." The sensor override setting affects the
valve in all programs to which it is assigned.
To select another valve, press "+" or "–" until the valve
number you want appears. Then repeat steps 6 and 7.
39
ESP-LX Modular Controller