The Phone - Samsung SGH-S366 User Manual

Quad band series portable digital mobile phone
Table of Contents

Advertisement

Note: Fully charge the battery before using your phone for the first time. A discharged battery
recharges fully in approximately four hours. You can use the phone while the battery is charging,
but this causes the phone to charge more slowly.
Warning! For connection to an electrical supply not located in North America, you must use an
adapter of the proper configuration for the power outlet. Use of the wrong adapter could damage
your phone and void your warranty.
1. Plug the connector of the travel adapter into the jack on the right side of

the phone.

2. Plug the adapter into a standard AC wall outlet. If the phone is off, the
display indicates that the phone is charging. If the phone is on, the bars
in the battery icon flash to indicate charging.
Note: The battery charging circuit may stop functioning if you are viewing a streaming video and
receive a call while charging as the capacity of the charging circuit will be exceeded.
3. When the phone is fully charged, the message "Battery Full" appears
on the display or the bars in the battery icon stop flashing.
4. Unplug the adapter from the power outlet and disconnect it from the
phone by gently pulling the connector out of the jack.
Getting Started
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents