SGH-S390G M O B I L E P H O N E User Manual Please read this manual before operating your phone, and keep it for future reference.
(patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software.
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
(Bluetooth word mark and “B Design”) are registered trademarks and are wholly owned by the Bluetooth SIG. ® Wi-Fi , the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. Customer Care Center: 1000 Klein Rd.
Understanding this User Manual ........5...
Finding My Own Phone Number ........53...
FCC Part 15 Information to User ....... . . 128...
Operating Environment ........
Before using your phone, see “Health and Safety Information” on page 121. Special Text This manual includes notes, tips and warnings, in special text that is set apart to point out important information, share quick methods for activating features, and to define terms.
Installing the Battery Removing the Battery Cover Remove the battery cover by placing your thumbnail in the slot at the bottom of the phone (1). If you have fragile nails, use a pointed object. Lift the cover up and off the phone (2).
Align the gold contacts of the battery with the contacts in the battery compartment in the phone (1). Press the battery down until it clicks into place (2). Make sure that the battery is properly installed before switching on the phone.
Replace the battery cover onto the back of the phone in the direction shown by the arrow (1). Press down along the bottom of the phone until you hear a light click (2). Press down firmly along the edges to ensure that the cover is flush with the phone (3).
You can use the phone while the battery is charging, although doing so requires additional charging time. Note: You must fully charge the battery before using your phone for the first time. A discharged battery recharges fully in approximately 4 hours.
When the battery is fully charged, the phone displays a message telling you the battery is full. Remove the connector from the phone. Note: Failure to unplug the wall charger before you remove the battery, can cause damage to the phone.
The phone launches the activation splash screen and searches for the network. Once the network has been found, you can make or receive calls. To turn the phone off, press and hold Note: The display language is preset to English at the factory. To change the language, press Menu Settings...
To unlock the phone screen, press the Unlock soft key and then press the OK soft key. Note: The Auto Key Lock feature automatically locks the screen when the screen times out. To change the default setting, press Menu Setting Up Your Voice Mail...
Section 2: Understanding Your Phone This section outlines some key features of your phone. It also displays the screen and the icons that display when the phone is in use. Features Your phone is lightweight, easy-to-use and offers many significant features. The following list outlines a few of the features included in your phone.
Left Soft key: Press to select the option displayed above the Left Soft Key. Send key: Press to make or answer a call. In Idle mode, press and hold to recall the last number dialed or received.
Alt/Lock key: While entering text, press to enter the numbers and symbols displayed on the upper half of the keys. Press Alt twice to continue to enter the numbers and symbols on the top half of the key, until you press Alt once again. Press and hold to Lock the keypad.
Power On/Off (END) key: Press to end a call. Press and hold for two seconds to turn phone on or off. While in the Menu mode, returns phone to Idle mode, then cancels input. Right Soft key: Press to select the option displayed above the Right Soft Key.
USB/data cable. Memory card port: Allows you to install a microSD or microSDHC card. Volume keys : From the Home screen, press to adjust volume. During calls or music playback, press to adjust volume. Press to mute the ringtone of an incoming call.
Back View The following illustration shows the back view of the phone with the camera lens. Camera Lens: Used to take pictures and shoot videos. External Speaker: Allows you to hear music. Display Layout Your display screen provides information about the phone’s status and options.
The following list identifies the symbols on your phone display: Shows the received signal strength. The greater the number of bars, the stronger the signal. Shows the level of your battery. The more bars you see, the more power remains. Displays when a call is in progress.
Displays in the View Tab when you receive a new text or picture message. Displays in the View Tab when you receive a new voice mail. Displays when you set an alarm to ring at a specified time. View Tab...
A backlight illuminates the internal display and the keypad. When you press any key, the backlight comes on. It goes off when no keys are pressed within a given period of time, depending on the setting in the Backlight Time menu. The display turns off after one minute to conserve battery power.
Numbered menu items, such as menus, sub-menus, and options can be quickly accessed by using their shortcut numbers. In Menu mode, Main Menus can be accessed by pressing the number keys (1 to 0, * and #) corresponding to their location on the screen.
Bluetooth, Alarms, Recent Calls, and Airplane Mode), and three empty shortcuts you can assign (10, 11, and 12). Note: To enter 10 for My Menu, enter a 0. To enter 11, enter an asterisk (*). To enter 12, enter the pound sign (#).
Displaying Your Phone Number Press Menu Settings Making a Call From the Idle screen, use the keypad to enter the number you wish to call and press Note: When you activate the Auto Redial option in the Voice Call menu (Menu Settings redials when the person does not answer the call or is on the phone.
Press the key. Using the Volume Keys During a call, use the Volume keys on the left side of the phone to increase or decrease the earpiece volume. In Idle mode, use the Volume keys to adjust the ringer volume.
Placing a Call on Hold While on a call, you can place the call on hold to answer an incoming call or place a new call, if your network supports this service. You can place the current call on hold.
Save to Contacts/View Contact Details: allows you to view the number’s Address Book • information or save the number as a new entry. This option only appears if the number is in your address book. New call: places the current call on hold and then allows you to enter and call •...
– Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the contacts you have selected. These DTMF tones are sent as a group. The DTMF tones are the tones used in phones for tone dialling, sounding when you press the number keys. This option is helpful for entering a password or an account number when you call an automated system, like a banking service.
Highlight a call and press the Options soft key to view the following options: • Details: allows you to view the caller’s name, phone number, time and date called as well as the length of the call.
Scroll through the list of missed calls. As the call highlights, the details display. Press To move to another call type, press the Left or Right Navigation key to make your selection. Saving a Missed Call to your Address Book From the Idle Screen, briefly press scroll to the Missed Calls screen.
At the Delete? prompt, press Yes to delete or No to cancel. Call Waiting The Call Waiting feature allows you to answer an incoming call while you have a call in progress, if this service is supported by the network. You must activate Call Waiting in the settings menu.
Press on hold, in a single multi-party call. Press to end a call. to join with both of your callers, the active call and the call...
This section outlines how to select the desired text entry mode when entering characters using the QWERTY keyboard-style keypad. This section also describes how to use the T9 predictive text entry system to reduce the number of key strokes needed to enter text.
The keys are labelled with the alphabet on the lower half and numbers and symbols on the upper half. Press the key corresponding to the character you want to enter. To switch between using the upper case characters and lower case characters, press .
The available Text Input modes are: T9 Predictive Text, Fn (123 numeric), Abc, and Symbols (Sym). Refer to the Text Input mode in the upper right corner of the screen to identify the mode. T9 Predictive Text: allows your keystrokes to be interpreted according to a built-in •...
Press Options Begin entering a word by pressing the 2 to 9 keys. Press each key only once for each letter. The built-in dictionary lists words that match the entered keystrokes.
T9 mode applies grammar rules to ensure that correct punctuation is used. To shift case in T9 mode, short press the • lock, Lower case, and Numeric. You can move the cursor by using the Left and Right Navigation keys. To delete letters, • press the key. Press and hold the key.
To use this feature, you may need to subscribe to your service provider’s multimedia message service. Important!: When creating a message, adding an image, a sound file, or a video clip to a text message changes the message from a text message to a multimedia message.
Message. • Favorites URL: allows you to attach a web URL from your Favorites list. • Contact Info: allows you to tap on an existing Address Book entry, then add it to your message by pressing Select. Review your message and press Send to.
Press Options • Recent Contacts: to select a recipient from your Recent Calls list. • Contacts: to select a recipient from your Contacts list (valid entries must have a wireless phone number or email address). • Groups: to select a recipient from the Group list.
• More: provides the following options: – Move to Phone/Move to SIM Card: If a message is stored in the SIM card, it is saved to the phone’s memory. If a message is stored in the phone’s memory, it is then saved to the SIM card.
– Sort by: allows you to sort the messages in your Inbox by Read/Unread, Recipient, Type, Subject, and size. Note: When storing a Contacts entry to the SIM card, only the Name, Number, Group, and Slot location display initially. To save additional information for a particular contact, such as other phone numbers, or e-mail, it is important to add new fields to that Contact information.
– Message Size : you can set the maximum allowed size for a multimedia message. – Keep a Copy : you specify whether you want to keep a copy of the sent messages on your – phone. Add My Business Card : you send your contact information along with your sent messages.
From the Idle screen, press Menu While listening to a message, press Options to view the following: Hold:/New Call: place the message you are listening to on hold or place a new call. • Contacts: add the caller to your contacts.
Signing into Your Email To sign into Email, follow these steps: Press Menu – or – Press Menu Follow on-screen instructions to complete the process. Messages Email. Email. Messages...
Contacts Press any of the following options to activate a function: • My Business Card: creates and attaches a virtual business card as an attachment to outgoing messages. For more information, see “Attaching Business Card to a Message” on page 40.
“Entering Text” on page 33. Press Options Note: By default, Contacts are saved on the phone. To copy them to a SIM card, see “Copying an Entry to the SIM Card” on page 57. Add New Contact. The Add New Contact screen...
Contacts Press Options Highlight the field to delete and press Options Note: Only certain new fields may be deleted. If you have not added any new fields to the contact, the Delete Field button does not display. Press Options Contacts, highlight a contact name and press Edit.
During the call press Options At the prompt, select New. • Select Update if this was a previously created entry and your are adding the current number to the previous entry. Select the type of phone number and press Select or Enter the desired information, see “Saving a Number from the Idle screen”...
Adding Pauses to Contact Numbers When you call automated systems, you are often required to enter a password or account number. Instead of manually entering the numbers each time, you can store the numbers in your Contacts along with special characters called pauses.
In Idle mode, press Menu Use the Up or Down Navigation key to locate a contact. Tip: The Groups tab allows you to locate contacts by group. Use the Left or Right Navigation key to move between Contacts and Groups.
• Edit: allows you to make changes to the contact information. • Delete: provide the option to delte either a Selected, Multiple, or All Contacts entries. • Send Business Card via: allows you to send a business card to the selected contact via Message, Email, Exchange Email, or Bluetooth.
Select On (to enable fixed dialing) or Off to disable the option and press Save. Enter the PIN2 code if you selected On. Important!: With Fixed Dial Mode enabled, you are NOT able to dial any number other than those created as FDN numbers.
Enter your PIN2 password and press the Note: The PIN2 code is provided by your Service Provider. Press Name and use the QWERTY keypad to enter a name for this FDN contact. Press Phone Number and use the QWERTY keypad to enter a contact phone number for this FDN contact.
Creating a New Group In Idle mode, press Menu Press Options Enter a name for this group in the New Group field and press Save. Press Options Highlight the Picture field and press the Select an image and press Options image displays in the Picture field and displays the name of the image to the right.
In Idle mode, press Menu Highlight the group that you want to rename. Press Options Backspace over the original name and use the keypad to enter a new name for this group, then press Save. Contacts Add Member, then press the...
Copying an Entry to the SIM Card Note: When storing a Contacts entry into the SIM card, note that only the name, phone number, group, and slot location are initially offered as fields (some SIM cards may allow an address as well).
SIM. The phone displays a list of your current contacts stored on the SIM card. Note: If the entry’s associated Group image has a SIM location icon on it, then the entry exists on the SIM card. This is the type you can duplicate. If the entry’s associated Group image does not have a SIM location icon, then this entry currently exists on the phone.
In Idle mode, press Menu from SIM. Highlight a member from the list or highlight All and press checkmark. Press Delete. At the prompt, press Yes to delete the contact, or No to cancel. Press to return to Idle mode. Contacts SIM Management...
Add to Favorites: add to your favorites list. • Enter URL: allows you to enter a URL, the option to add it to your favorites and create a title. • Advanced: choose to select from the following options: History, Send URL Via, Save, Saved •...
In Idle mode, press Menu the Select soft key or the Enter URL This menu allows you to manually enter the URL address of a web site that you wish to access and to add it to your Favorites. In Idle mode, press Menu Select soft key or the key.
Clear Cache You can clear the information stored in the cache memory, the phone’s temporary memory that stores the most recently accessed Web pages. In Idle mode, press Menu Cache and press the Select soft key or the Browser Options key.
Select from one of the following functions: Audio, Games&Apps, Pictures, Video, Other Files, or Used Space. Highlight the On phone tab or On card tab by moving left or right with the navigation keys to filter the entries based on their current location (Phone, or Memory Card).
• Caller Ringtone: allows you to assign a ringtone to someone in your Contacts list. Select Search contact to find an existing contact or Create contact to create a new one.
• View: allows you to view the selected picture. • Send via: allows you to send your selection in a message, email, Exchange email, or via Bluetooth. • Set as: allows you to set the selected picture as Wallpaper or as a Caller ID. My Folder Audio Recorded Audio.
• Take Photo: launches the camera to allow you to take a photo. • Create Folder: creates a new sub-folder in the Pictures folder. • More: provides you with the ability to Lock/Unlock, Sort by or to view the file Properties. Lock/Unlock : lock or unlock selected picture.
Press Options. Depending on the image type the following options may be displayed: • Zoom: activates Zoom mode so you can use the Left or Right soft keys to Zoom in or Zoom out. • Send via: allows you to send a picture via Multimedia message, Email, Exchange Email, or via Bluetooth.
• Transform: allows you to Resize, Rotate, or Flip the image. • Crop: allows you to crop the image. Use the Navigation keys to place the red box around the image until you center a portion in the box, then press Options •...
You can set up folders to save your videos. Press Menu My Folder Video Play: allows you to play the selected video. • Send via: you can send your video file in a Message, an Email, an Exchange email or by • Bluetooth. Delete: delete selected video file(s). •...
The memory usage for the different items displays. Highlight Audio, Games&Apps, Pictures, Video, or Other Files. Highlight the item you want to delete (to free up memory) and press Select or press the key. Highlight an item in the list and press Check to place a checkmark next to the item.
Section 9: Applications Your phone includes applications that allow you to use your handset for a variety of activities. The Music application can organize and play music files stored on your phone and memory card. Create playlists, add, rearrange and remove files, and launch the browser to shop for more music.
Select Off, 1, or All. • Shuffle on /off: allows you to turn shuffle On or Off. When turned on, the current list of songs are randomly shuffled for playback.
Playing Music Transferred to the Handset In Idle mode, press Menu Use the Up or Down Navigation key to select the song you want to listen to and press the Playing Music through a Stereo Bluetooth Device Your device supports the Stereo Bluetooth profile that when synchronized to a stereo Bluetooth headset plays music in stereo.
Navigate the playback options by using both the Navigation key and • Scroll over the Navigation key (to the right) to highlight the Rewind • To temporarily stop the music, scroll over the Navigation key to select Pause press • Use the navigation key to highlight the Fast Forward the next song.
Using Playlists Playlists are used to assign songs to a list of preferred media which can then be grouped into a list for later playback. These Playlists can be created via either the handset’s Music player options menu or from within a 3rd party music application (such as Windows Media Player) and then downloaded to the handset.
Highlight All, an individual song, or multiple songs and press the place a check mark beside your selection. Press the Add soft key and wait for the song to add to the current playlist. Removing songs from a Playlist In Idle mode, press Menu Highlight Playlists and press the Select the playlist and highlight the track to delete.
Command, you can make your selection from the following list of available commands: • Call <Name or #>: dials a name or number listed in your contact list. If multiple numbers exist (i.e. home, work, or other) say the name and the number type (location).
If it does not recognize your command after a few seconds, a voice prompt asks you to repeat the command. If it does not recognize your command again, the following message displays “Sorry, no match found,”...
• Send via: allows you to send your voice clip to other people using either a Message, Email, Exchange Email, or to a compatible Bluetooth device. • Set as: allows you to set the current memo as a Call Ringtone, a Caller Ringtone for a specific entry or an Alarm Tone.
Press Options Set the following options: • Name: allows you to use a specific name for the alarm. The name you enter will display on the screen when the alarm activates. • Alarm activation: use the Left or Right Navigation key to select On or Off.
Press Menu Tools Highlight Auto Power and press the Select On and press Save. Note: If the menu option is set to Off, and the phone is switched off at the specified time, the alarm does not ring. Alarms. key.
• Create: allows you to select an event category: Appointment, Anniversary, Holiday, Important or Private event. • Go to: allows you to go to your today’s calendar or that of a specified date. or any other external key such as the Calendar.
• Eco Day List: allows you to add important Eco-friendly holidays and events to your calendar. • Delete: allows you to delete a calendar event. This option only appears if you have added events to your calendar. • Settings: this option allows you to configure the Calendar’s Starting Day and View by (Month, Week, or Day).
Left or Right Navigation key to select the number of repetitions for this alarm (Daily, Weekly, or Monthly). Select the Every field and enter the number of times you want this alarm to repeat. Highlight the Except weekends checkbox and press Check to exempt non- work days (weekends) from the event notification.
• Alarm date: enter a date for this alarm (format is MM/DD/YYYY). • Alarm Time: enter a time for this alarm to sound. Press Save to assign the new time. • Alarm Tone: allows you to choose an alarm tone. Once selected, navigate to Tones, select a file, and press Select to assign the audio file as the current alarm tone.
Press Menu Tools Highlight the Bill field and use the keypad to enter the total amount of the bill. Select the Tip (%) field and use the keypad to change the tip percentage. Enter the number of people splitting the bill in the # paying field.
Select the specific converter function and press the • Each converter function has a field for the type of unit to convert, and the type of unit to convert to. An additional field allows you to input the unit amount to convert.
Press Back or press World Clock World Clock allows you to view the time of day or night in other parts of the world. World displays time in the 100 different cities, within all 24 time zones around the world. The time in your time zone is automatically displayed.
At the Delete? prompt, press Yes to delete or No to cancel. Timer You can use this menu to set a countdown timer. Use a timer to count down to an event based on a preset time length (hours, minutes, and seconds).
• Normal: default sound profile where the incoming Alert Type is set to melody. You can modify Normal settings for Call, Message and Phone. • Silent: allows you to select mute or vibrate alerts that stop the phone from making noise, in a theater for example. You can modify Silent settings for Call, Message and Phone.
Highlight Call Alert Type and press Select one of the following and press OK: • Melody: the phone rings using the ring melody selected in the Call Ringtone menu. • Vibration: the phone vibrates. • Vibration then Melody: the phone vibrates then plays a melody.
Highlight Message Alert Type and press Select one of the following: • Melody: the phone rings using the ring melody selected in the Message Alert Tone menu. • Vibration: the phone vibrates. • Vibration & Melody: the phone vibrates and plays a melody simultaneously.
• Mute: the phone is silent and does not play a melody or vibrate. Highlight Phone Sound Volume and press Use the Left or Right navigation key to adjust the volume level (range is 0-7) and press OK. Press Save to return to the Sound Profile menu.
Save soft key or the – Backlight Time : allows you to select the amount of time for the keypad backlight to remain on and the length of time for the display backlight to remain dim after the keypad times out.
– Font Size : allows you to select a size for the selected font to make your selection. Choose from Large , Medium , or Small . Press the Save soft key or the key to confirm your selection.
You can customize various phone settings. In Idle mode, select Menu Language This menu allows you to select a display language for Text language and Text Input mode. Choose from Automatic, English, and Español. In Idle mode, select Menu Highlight Screen text and press Highlight one of the following selections and press OK: •...
The following options are available: – Off: you are not asked to enter the phone password when you switch on the phone. – On: you are required to enter the phone password when you switch on the phone.
– On: you must enter the PIN each time the phone is switched on. Note: Before disabling the Check PIN Code feature, you must enter your PIN. You can obtain your PIN from your service provider’s customer service representative.
• A full length number with a specific contact name can be entered into the FDN list. • Wildcard entries allow you to dial a range of number with a single entry: ex. 555 – All dialed numbers that begin with 555 are allowed. Numbers that do not match the conditions in the FDN list are restricted.
Note: User Data such as contacts, messages, pictures, videos, and music is not deleted. Restore Phone The Restore Phone option is the same as the Reset Phone option described above in that all settings are reset to factory defaults. However, with the Restore Phone option, all user data deletes.
Airplane Mode allows you to use many of your phone’s features, such as Games, Voice notes, and more, when you are in an airplane or in any other area where making or receiving calls or data transmission is prohibited. When your phone is in Airplane Mode, it cannot send or receive any calls or access online information.
Adjusting the General Call Settings Press General and select from the following options: • Show My Number: allows you to show or hide your number on the caller display of the phones you call. Select Set by network, Show number, or Hide number.
– Press Options and select one of the following: Activate, Deactivate, or Check status • Auto Redial: the phone automatically redials the last active number if the call was either cut off or you were unable to connect.
The Bluetooth activated confirmation prompt displays on your phone. Note: If the first item in the Bluetooth menu is Bluetooth:On, then Bluetooth is already activated. Discoverable The Discoverable option allows your phone to wirelessly transmit its phone name and status to every device within its range.
(asks before reconnecting) and press the Pair soft key. Note: The first time you try to pair with a handset, you and the owner of the other handset must enter the same Passkey. Once the handsets are paired, you do not need to use the Passkey again.
Bluetooth Info. Press the Note: The default input entry method is Abc, where the initial character is Uppercase and each consecutive character in that same word is left as lowercase text. Press the Save soft key when you are finished.
Note: Disable the Bluetooth feature before initiating a USB connection with the phone. Prior to connecting the USB cable to the phone, install the latest version of the PC Studio application. This application installs the necessary USB drivers onto your machine. For a free download of PC Studio, go to www.samsung.com/us/support...
– Empty Cookies: deletes cookies. Cookies are pieces of personal information sent to a web server while navigating the web. – Cookie Options: sets whether cookies are stored on your phone (Accept All or Reject All). If you select Prompt, the phone will ask you to save the cookies on every page requiring cookies.
Music Settings. Select one of the following options: • Background Playing : allows you to set whether or not you can listen to music while working in other applications. • Sound Effects : allows you to set the Equalizer to Normal, Rock, Pop, Dance, Classic, Jazz, Wide, Dynamic, or Surround.
Settings. Press either of the following fields and edit the information: • Starting Day : allows you choose which day marks the first day in your calendar week (Sunday or Monday). • View By : allows you to choose the default view for appointments used by the Calendar application when launched (Month, Week, or Day).
From this menu you can clear the memory for Messages, Email, Exchange Email, My Folder, Calendar entries, Tasks, Memos, or Contacts. You can all select All to clear everything listed. In Idle mode, select Menu Memory. Press Check to place a checkmark alongside those applications you wish to clear.
Check the Used Space In Idle mode, select Menu Space. Select one of the following storage categories to view the contents of a category’s memory: • Shared Memory • Messages • My Folder • Calendar • Tasks • Memo • Contacts Press to return to the Idle screen.
Taking pictures with your device’s built-in camera is as simple as choosing a subject, pointing the camera, then pressing the camera key. Note: When taking a photo in direct sunlight or in bright conditions, shadows may display on the photo.
If you move the camera icon to the center of the box on the display, the box turns orange and the picture is automatically taken. Repeat this step for up to 6 segments. When you are done, press the Camera key.
Settings: Setup tab – Review screen: allows you to review a photo after taking it. – Shutter sound: allows you to select a tone to play when the camera’s shutter opens and closes. Sound selections are Shutter or None. – Default storage: allows you to configure the default storage location for images/videos as either Phone or Memory Card (if inserted).
Camera). • Delete: allows you to delete the picture or video. • Set as: allows you to set the photo as Wallpaper or Caller ID (this option only appears in Camera). • Edit: allows you to edit the picture (this option only appears in Camera).
Press Search contact, highlight an entry and press – or – Press Create contact to create a new Address Book entry with the image already assigned to the new contact. For more information, refer to “Managing Your Contacts” on page 46.
Shooting Video Tip: When shooting video in direct sunlight or in bright conditions, it is recommended that you provide your subject with sufficient light by having the light source behind you. In Idle mode, press and hold the Camera key mode.
Recording Mode: select a video recording mode. Select Normal to record a video within the • limit of the currently available memory. Select Limit for MMS to record a video suitable for an MMS message. Camcorder Resolution: allows you to set the video size to 176x144 or 320x240 (if •...
– Sort by: allows you to sort your videos by Date, Type, Name, or Size. – Properties: allows you to see the details of your video including Name, Format, Resolution, Size, Forwarding capability, Date created, and physical Location. Video.
The low levels of RF cell phones emit while in use are in the microwave frequency range. They also emit RF at substantially reduced time intervals when in the stand-by mode.
Very high levels of electromagnetic energy, such as is found in X-rays and gamma rays, can ionize biological tissues. Ionization is a process where electrons are stripped away from their normal locations in atoms and molecules. It can permanently damage biological tissues including DNA, the genetic material.
For people with the heaviest use of cell phones (an average of more than ½ hour per day, every day, for over 10 years) the study suggested a slight increase in brain cancer.
If there is a risk from being exposed to radio frequency energy (RF) from cell phones - and at this point we do not know that there is - it is probably very small. But, if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your RF exposure.
Use speaker mode or a headset to place more distance between your head and the cell • phone. Hands-Free Kits Hands-free kits may include audio or Bluetooth body-worn accessories such as belt-clips and holsters. Combinations of these can be used to reduce RF energy absorption from cell phones.
Reduce the amount of time spent on the cell phone; • Use speaker mode or a headset to place more distance between the head and the cell • phone. Some groups sponsored by other national governments have advised that children be discouraged from using cell phones at all.
RF energy. The RF exposure limit set by the FCC for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of the rate of absorption of RF energy by the human body expressed in units of watts per kilogram (W/kg).
Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the SAR limit established by the FCC. Tests for each model phone are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC.
Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is • connected. Consult the dealer or an experienced radio/TV technician for help.
• Do not engage in stressful or emotional conversations; • Let the person with whom you are speaking know that you are driving and will suspend the • call if necessary; Do not take notes or look up phone numbers while driving;...
Do not place your battery in or near a heat source. Excessive heating can damage the • phone or the battery and could cause the phone or the battery to explode. Do not dry a wet or damp battery with an appliance or heat source such as a microwave oven, hair dryer, iron, or radiator.
Do not dispose of the phone or the battery in a fire. The phone or the battery may • explode when overheated. Do not handle a damaged or leaking battery. Do not let leaking battery fluid come in • contact with your eyes, skin or clothing. For safe disposal options, contact your nearest Samsung-authorized service center.
Samsung cares for the environment and encourages its customers to recycle Samsung mobile devices and genuine Samsung accessories. Proper disposal of your mobile device and its battery is not only important for safety, it benefits the environment. Batteries must be recycled or disposed of properly.
Follow local regulations regarding disposal of mobile devices and batteries Dispose of your mobile device and batteries in accordance with local regulations. In some areas, the disposal of these items in household or business trash may be prohibited. Help us protect the environment - recycle! Warning!: Never dispose of batteries in a fire because they may explode.
The display on your mobile device is made of glass or acrylic and could break if your mobile device is dropped or if it receives significant impact. Do not use if screen is broken or cracked as this could cause injury to you.
AGPS has limitations and might not work in your area. Therefore: Always tell the emergency responder your location to the best of your ability; and • Remain on the mobile device for as long as the emergency responder instructs you.
Remember that your mobile device may be the only means of communication at the scene of an accident; do not cut off the call until given permission to do so. Care and Maintenance Your mobile device is a product of superior design and craftsmanship and should be treated with care.
Extreme heat or cold Avoid temperatures below 0°C / 32°F or above 45°C / 113°F. Microwaves Do not try to dry your mobile device in a microwave oven. Doing so may cause a fire or explosion. Dust and dirt Do not expose your mobile device to dust, dirt, or sand.
• you or if the person sitting next to you can hear what you are listening to. Do not turn the volume up to block out noisy surroundings. If you choose to listen to your • portable device in a noisy environment, use noise-cancelling headphones to block out background environmental noise.
Limit the amount of time you listen. As the volume increases, less time is required before • you hearing could be affected. Avoid using headphones after exposure to extremely loud noises, such as rock concerts, • that might cause temporary hearing loss. Temporary hearing loss might cause unsafe volumes to sound normal.
Remember to follow any special regulations in force in any area, and always switch your mobile device off whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the mobile device or any accessory to another device, read its user's guide for detailed safety instructions.
Should use the ear opposite the implantable medical device to minimize the potential for • interference; Should turn the mobile device OFF immediately if there is any reason to suspect that • interference is taking place; Should read and follow the directions from the manufacturer of your implantable medical •...
When your Device is Wet Do not turn on your device if it is wet. If your device is already on, turn it off and remove the battery immediately (if the device will not turn off or you cannot remove the battery, leave it as-is).
If your hearing device happens to be vulnerable to interference, you may not be able to use a rated mobile device successfully. Trying out the mobile device with your hearing device is the best way to evaluate it for your personal needs.
Standards Institute (ANSI) C63.19 standard. HAC for Newer Technologies This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids.
Restricting Children's Access to Your Mobile Device Your mobile device is not a toy. Do not allow children to play with it because they could hurt themselves and others, damage the mobile device, or make calls that increase your mobile device bill.
If you continue to have discomfort during or after such use, stop use and see a physician. If your device has a camera flash or light, do not use the flash or light close to the eyes of •...