3Com CoreBuilder 9000 Device View User Manual page 27

Backplane Connections — Displays a table showing the current
backplane connections (switch fabric module to interface module) and
the status of each connection.
Trunk Setup — Displays a table showing the trunks, and member
ports, currently defined on the device.
IP Configuration Settings
The IP Configuration section contains read-only pages, which are valid for
Layer 3 modules only. To create, edit, or delete IP configuration setting,
select the appropriate Layer 3 module in your CoreBuilder 9000 Switch.
The IP Configurationsection includes the following tabbed pages:
ARP Cache — Allows you to view the Address Resolution Protocol
(ARP) cache. The ARP cache is a table of IP addresses learned by the
device and their corresponding MAC addresses.
Interfaces — Allows you to view the IP interfaces defined on the
CoreBuilder 9000 Switch. You define interfaces to establish the
relationship between the ports on your device and the subnetworks in
your IP network. IP interfaces are used for managing the device and to
help route packets on your network. You can have up to 32 IP
interfaces for management for each device.
Routes — Allows you to view the IP routes defined on the CoreBuilder
9000 Switch. Each device maintains a table of routes to other IP
network, subnetworks, and hosts. You can either make static entries
in this table or configure the device using the Routing Information
Protocol (RIP).
When configuring the default route, neither a destination address or
network mask are required. If the default type is selected the first two
fields will be disabled. Only one default route can exist, so if one is
already defined, it should not be possible to select the default type.
Chassis Settings
The Chassis section contains the following tabbed pages:
PSU — Provides detailed information about the power supplies
installed in the chassis.
Fan Status — Allows you to manage and view information about the
fan units installed in the chassis.
Modules — Provides detailed information about the modules installed
in the chassis.
Managing CoreBuilder 9000 Switches 27