Weighing; Before Weighing - Inscale IBW 3 Instructions Manual

5.0 WEIGHING

5.1 BEFORE WEIGHING

Check the setting of the auto shut off function, see section 6.2. If the auto
shut off function is on, the scale will shut off after a period of time if the scale
is not used and it has a stable reading.
5.2 WEIGHING
• Press [On/Off] to turn on the scale. The display will show the software
revision then show the battery voltage "X.X vol" .Then it will begin it's
self-checking test from 0 to 9. When reading is stable, the display will
show "0.00", stable symbol, zero symbol, and the weighing unit used
the last time the scale was used.
• Press [Units/ ] to select units. Press [Units/ ] to select units from
"g" / "Kg" / "lb" / "oz"/"CUS". Only the weighing units enabled will be
displayed, See section 6.9.
• Check if the reading is "0.00", if not, press [Zero/
zero symbol will be displayed.
• Put the item to be weighed on the pan. When the reading is stable, the
net weight will be shown.
If a container is used, put the container on the pan and press the [Tare/↵ ↵ ↵ ↵ ] key when
the reading is stable. The display will show "0.00" and the zero symbol. If the
container is more than 2% of the capacity, the NET symbol will be on. Load the
container or remove material from the container, the scale will show the net weight
of the material added or removed.
© Inscale Ltd. 2010
7
p a g e
]. "0.00" and the
ESC