User Functions; Parts Counting Function; Percentage Weighing - Inscale IBW 3 Instructions Manual

5.3

USER FUNCTIONS

The parts counting, percent weighing and calibration functions can be accessed
using the [Func/ ] key, if the functions have been enabled as described in section
6.0.
If the function is turned off the function will not be available. Only functions that
have been turned on can be accessed.

5.3.1 PARTS COUNTING FUNCTION

• In normal weighing mode, press [Func/ ] key to move to the first
available function, usually the parts counting mode.
• The display will show "PC—10pcs", press the [Hold/ ] key to go
through the preset sample piece values of 10, 25, 50 or 100 pieces. For
example if you selected PC-25pcs, hand count out 25 pieces and put
them on the scale.
• Press the [Tare/↵ ↵ ↵ ↵ ] key once the stability indicator comes on to confirm
the entered value. The display will show the number of pieces placed
on the pan.
• If more items are put on the pan, the increased count value will be
shown.
• Press [Zero/

5.3.2 PERCENTAGE WEIGHING

• In the weighing mode, press [Func/ ] key twice to access the
percentage weighing mode, the display will show "PEr".
• Press the [Tare/↵ ↵ ↵ ↵ ] key to set the reference sample value, the display
will show "SE ".
• Place the item to be set at 100% on the pan, and press the [Tare/↵ ↵ ↵ ↵ ] Key
when the stability indicator comes on.
© Inscale Ltd. 2010
] to exit and go back to the normal weighing mode.
ESC
8
p a g e