Hold Function; Calibration - Inscale IBW 3 Instructions Manual

5.3.4 HOLD FUNCTION

• When in weighing mode, press [Func/ ] four times until the display
shows"5 HOD"
• Press the [Hold/ ] key to go through the holding time of 5、10、20、
30, AUTO or Manual.
• If AUTO is selected the weight will be automatically held (locked on the
display) when stable until the [Hold/ ] key is pressed. If a numeric
value is selected the weight will be held only when the [Hold/ ] key is
pressed and it will be held for the number of seconds selected.
• For example if you selected 5, the display will lock for 5 seconds after
the [Hold/ ] key is pressed. If you selected AUTO, the scale will lock
when stable and hold the value until you press the [Hold/ ] key.
• If Manual is selected the [Hold/ ] key will toggle the display to hold or
release the value when it is pressed.
• Press [Tare/↵ ↵ ↵ ↵ ] to confirm the value and start hold weighing function.

5.3.5 CALIBRATION

• Refer to section 7 for details
© Inscale Ltd. 2010
10
p a g e