Switching The Phone On/Off - Samsung SGH-P100 Manual

Tri band gprs telephone
Hide thumbs Also See for SGH-P100:
Table of Contents

Advertisement

Getting Started
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter
from the power outlet and from the phone by
pressing the gray tabs on both sides of the
connector and pulling the connector out.
Note: Do not remove the battery from the phone
without unplugging the adapter while it is
charging. If you do this, the phone may be
damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and
a message will be repeated at regular intervals on
the display:
**Warning**
Low Battery
Menu
When the battery becomes too weak for the phone
to operate, it switches off automatically.
20
Name

Switching the Phone On/Off

1. Open the folder.
2. Hold down the
switches on.
3. If the phone asks for a password, enter the
password and press the OK soft key. The phone
password is factory set to "00000000." For
further details, see page 122.
4. If the phone asks for a PIN, enter the PIN and
press the OK soft key. For further details, see
page 123.
The phone searches for your network and when
it finds the network, the idle screen, illustrated
below, appears on each display. Now, you can
make or receive a call.
Service Provider
05:17
Mon 26 May
Menu
Name
Note: The display language is preset to English at the
factory. To change the language, use the
Language menu option (Menu 6.5); for
further details, refer to page 92.
5. When you wish to switch the phone off, hold
down the
key until the power-off image is
displayed.
Getting Started
key until the phone
05:17
Mon/26
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sgh-v200

Table of Contents