TROUBLESHOOTING - See appropriate section in manual unless directed
to a Sears Parts & Repair Centre.
PROBLEM
Does not start
1. Dirty air filter.
2. Out of fuel.
3. Stale fuel.
4. Water in fuel.
5. Spark plug wire is
6. Bad spark plug.
7. Loose blade or broken
8. Control bar in released
9. Control bar defective.
10. Fuel valve lever (if so
11. Weak battery (if equipped).
12. Disconnected battery
CAUSE
disconnected.
blade adapter.
position.
equipped) in OFF position.
connector (if equipped).
18
CORRECTION
1. Clean/replace air filter.
2. Fill fuel tank.
3. Empty fuel tank and refill tank
with fresh, clean gasoline.
4. Empty fuel tank and refill tank
with fresh, clean gasoline.
5. Connect wire to plug.
6. Replace spark plug.
7. Tighten blade bolt or
replace blade adapter.
8. Depress control bar to
handle.
9. Replace control bar.
10. Turn fuel valve lever
to the ON position.
11. Charge battery.
12. Connect battery to engine.