Advertisement
STEP 8:
Using a 15mm socket begin tightening the exhaust clamps that are installed to this point. Position the clamp
bolts to the top of the pipes to avoid the potential ground clearance issues. Ensure the mid-muffler is
positioned in a way that it sits parallel to the bottom of the truck.
STEP 9:
Locate the right side tail pipe, again be sure to slip the clamp onto the pipe prior to installing the tail pipe.
Install one of the rubber exhaust isolators onto the hanger as shown in the second picture.
R/H tailpipe
Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356
Techline 1-800-367-3788
Part Numbers: M-5200-F1550DSB,DSC,DTB,DTC
M-5200-F1535DSB,DSC,DTB,DTC
2015 F-150 5.0L/3.5L Cat Back Exhaust System Rear Exit
INSTALLATION INSTRUCTIONS
Page 9 of 12
IS-1850-0485
Advertisement
