Advertisement
STEP 5:
From your kit find the Brackets with isolators. These will be installed onto the lower rear leaf spring
shackle bolt.
STEP 6:
To install these hangers you will need a 21mm and a 24mm socket to loosen the lower shackle bolt
without removing it. (Back shackle bolt out approximately ¼") Slip the new hanger onto the bolt just behind
the bolt head.
STEP 7:
Once installed be sure to torque the shackle bolt to 235 Nm (173 lb-ft)
Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356
Techline 1-800-367-3788
Part Numbers: M-5200-F1550DSB,DSC,DTB,DTC
M-5200-F1535DSB,DSC,DTB,DTC
2015 F-150 5.0L/3.5L Cat Back Exhaust System Rear Exit
INSTALLATION INSTRUCTIONS
Page 8 of 12
IS-1850-0485
Advertisement
