Page 3
NZ Support: Australia Support: 0800 683 352 1800 353 383 sales@utemaster.co.nz utemaster@autosafe.com.au www.utemaster.co.nz www.utemaster.com.au Remove the rubber feet from the Sports Bar. Highly recommend watching the video before installation. Scan the QR code. Fitting Video https://wi.st/3aZjmPp Cut the rubber feet as per the video.
Page 4
NZ Support: Australia Support: 0800 683 352 1800 353 383 sales@utemaster.co.nz utemaster@autosafe.com.au www.utemaster.co.nz www.utemaster.com.au Insert foam feet to the sport bar. 50315-16-07 50315-16-09 4.__ 1.__ 3mm Foam 3mm Foam Foot Foot Trimmed rubber Trimmed rubber 5.__ 2.__ feet feet 50315-16-06 6mm 50315-16-08 3.__ 6.__...
Page 7
NZ Support: Australia Support: 0800 683 352 1800 353 383 sales@utemaster.co.nz utemaster@autosafe.com.au www.utemaster.co.nz www.utemaster.com.au 1.___ • Fit Foam Washer to face plate to prevent water ingress • Bolts go into existing threaded holes in the sport bar. 2.___ • Begin threading the bolt using a hex key to prevent cross- threading 3.___ •...
NZ Support: Australia Support: 0800 683 352 1800 353 383 sales@utemaster.co.nz utemaster@autosafe.com.au www.utemaster.co.nz www.utemaster.com.au Adjust the nuts shown on the lock strike to affect the final closing height of the Load-Lid™ Slam Lock Refer to the video shown on Adjustment Video.