Installation - Marantz CC3000 User Manual

1CC3000/N&K1B(1-18) Eng 01.6.2 7:12 PM ページ7
COAXIAL
R
ANALOG
DIGITAL
OUT
OUTPUT
1 2
Connections
1 Digital Out
This output supplies digital signal and can therefore
only be connected to an input which is suitable for
this signal. Use here a lead with one cinch plug on
either end.
Never connect this socket to a non-digital input
of an amplifier, such as AUX, CD, TAPE, PHONO
etc!
2 Analog Out
For the connecting cable to the amplifier.
• Insert a red plug into the 'R' socket and the
other plug into the 'L' socket.
• Insert the two other plugs into the corresponding
sockets of the CD or AUX input of your amplifier.
You can also use the TUNER or TAPE IN connection,
but never the PHONO input!
L IN OUT
REMOTE
CONTROL
4
3
3 Remote Control
For connecting up the equipment when you are
incorporating the changer in a HiFi system with its
own remote control system.
4 Main Fuse Holder ("/K" version only)
5 Voltage Selector ("/K" version only)
VOLTAGE SELECTOR
5

INSTALLATION

7
3139 116 18871