Designs for Vision LED DayLite Micro User Manual page 9

tighten the shaft. To unlock the position, loosen the shaft by
turning counter-clockwise.
NOTE: The shaft will only turn a limited distance. Do not
force in either direction.
Press the power button on the front of your battery pack.
The headlight will turn on at high intensity. The power
button will illuminate and the status indicator will display
the current state of charge. A second press of the power
button will lower the light intensity of the headlight. A third
press turns the power pack off.
The LED DayLite® Micro also incorporates a Low Battery
Warning system. With approximately ten (10) minutes of
battery power remaining, the headlight will flash three
times. At five (5) minutes remaining, the headlight will flash
another three times. At 30 (thirty) seconds remaining, the
headlight will flash continually until the battery is
completely depleted.
®
9
LED D L M U G
AY ITE ICRO SER UIDE