Table of Contents
Advertisement
5. Replacing the Lamp
!
Unplug the unit completely from the mains before you change a lamp. To do this, unplug the power
cord. Allow the lamp to cool before changing necessarily. This takes approximately 5 minutes.
Do not touch the glass body with your bare hands. Notes the lamp manufacturer should also be strictly
observed.
No lamps may be used with a higher power rating in the device. For lamps with higher performance arise
during operation higher temperatures, for which the equipment was not designed. Noncompliance will invali-
date the warranty.
This spotlight is optimal for 230 volt. Application up to max. 1000 W.
!
6. Technical data
Power supply
Energy efficiency: A++ to F
Power consumption max.: 1000 W
Light source
LM type: Halogen
Socket: GX16D
Connections
Power-in: Schutzko
Life Risk!
Seat in the lamp only when
the power is off. Unplug the
power cord!
Attention!
Do not turn on the device before you have not closed the housing cover!
Attention!
If the lamp is damaged or
deformed by heat,it should be
replaced immediately.
Hardware
Protection class: IP20
Suitability: Indoor
Dimension (L/W/H): 470 x 260 x 275 mm
Material: Aluminium
Weight: 1,60 kg
7
Advertisement
Table of Contents
