Advertisement
Installation Instructions Product-Ident: 75181
6 Marking of the door card cut-outs
The cut out for the speakers are providing the full volume of the car door:
6.1 Draw the midrange cut-out acc. to figure. Please consider overlapping midrange position on the backside of the doorboard, align
the doorboard planely and mark the cut outs accordingly.
6.2 Mark the cut outs for the woofers on the door card. Enlarge them approx. 1cm (= approx. outer diameter of the
woofers)
6.3 For a plane alignment of the doorboard also mark the overlapping tray for the cut-out.
IMPORTANT! Check all marked cut-outs:
The fastenings of the doorboards must have to be screwed with the door card.
The fastenings of the door card must not be removed!
6.4 Remove the doorboard again and cut out the marked positions on the door card. Use a compass saw.
IMPORTANT: Start with the cut-out for the midrange
6.5 Drill the bore holes for the screws according to the marks set before - use a 6mm drill.
example
example
example
Advertisement
