Cambridge Audio 640C Service Manual page 8

AP Part No. DRAWING
NO
AP13618/1 5 WAY TRAY MOTOR CABLE FLAT WIRE STYLE 350mm
AP13619/1 6 WAY SPINDLE MOTOR CABLE 200mm
AP10616/6 SERVO PCB SHIELDING CAN
AP10001/2 CAMBRIDGE AUDIO SCREENING CAN
AP13625/1 2 WAY MUTE CABLE, FLAT WIRE STYLE CABLE 300mm
AP13626/1 3 WAY SHIELDED DIGITAL OUT CABLE 130mm
AP13627/1 5 WAY SHIELDED DIGITAL OUT CABLE 120mm
AP13628/1 2 WAY SHIELDED MASTER CLOCK CABLE 160mm
M2.6 X 6 POZI PAN MACHINE SCREW
M2.6 X 10 POZI PAN PLASTITE
SIDE PANEL ASSEMBLY
AP12725/1 CAMBRIDGE AUDIO NEW RANGE PRESSED SIDE PANEL (2 RIDGE) (SILVER)
AP12727/1 CAMBRIDGE AUDIO NEW RANGE FRONT PLASTIC SUPPORT (2 RIDGE WITH
CAPTIVE M2.6 NUTS)
AP12728/1 CAMBRIDGE AUDIO NEW RANGE REAR PLASTIC SUPPORT (2 RIDGE WITH
CAPTIVE M2.6 NUTS)
M2.6 X 10 C/S POZI PLASTITE
D640C REAR PANEL ASSEMBLY
AP13435/2 CAMBRIDGE AUDIO NEW RANGE CD REAR PANEL PRINTED
M3 X 10 POZI PAN PLASTITE
M3 X 8 POZI PAN PLASTITE
M3 X 10 POZI PAN MACHINE SCREW
M3 NUT STANDARD
M3 LOCK WASHER
AP13340/1 A600 LIDDING TAPE FOR FRONT AND REAR PANELS
AP13342/1 A600 LIDDING TAPE FOR SIDE PANELS
PY574 AP12733/2 CAMBRIDGE AUDIO NEW RANGE TOP PANEL WITHOUT VENTS (SILVER)
PY516 M2.6 X 6 C/S TORX MACHINE SCREW (SILVER)
Note, resistors, capacitors and other 'generic' electronic components are not usually stocked by the manufacturer. Please obtain these locally.
DESCRIPTION QTY COMMENTS
1 CONNECTS THE SERVO PCB TO
THE CD MECH, RUNS UNDER THE
FRONT OF THE MECH AND UNDER
THE SERVO PCB
1 CONNECTS THE SERVO PCB TO
THE CD MECH, RUNS UNDER THE
CD MECH
1 SCREENED WITH ARTWORK
AP13721/1 POSITION OVER SEVRO
PCB AND SOLDER FIX
1 POSITION OVER DAC PCB AND
SOLDER FIX
1 CONNECTS DAC PCB TO THE
SERVO PCB
1 CONNECTS DAC PCB TO THE
SERVO PCB
CONNECTS DAC PCB TO THE
SERVO PCB
1 CONNECTS DAC PCB TO THE
SERVO PCB
5 TO AFFIX BOTTOM PANEL TO SIDE,
FRONT AND REAR PANELS
4 FIX CORNERS OF BOTTOM PANEL
TO PLASTIC INSERTS
2
2 POSITION IN PLACE ON PLASTIC
FRONT INSERTS
2 POSITION AT FRONT WITHIN SIDE
PANELS
2 POSITON AT REAR WITHIN SIDE
PANELS
8 TO AFFIX SIDE PANELS TO PLASTIC
INSERTS
1
1 SCREENED WITH ARTWORK
AP13669/1, THEN POSITION ON
REAR PLASTIC SUPPORTS
4 TO AFFIX REAR PANEL TO REAR
PLASTIC INSERTS
3 TO FIX DAC PCB ELECTRONIC
PARTS TO REAR PANEL
2 FIXES THE IEC SOCKET MOUNTED
ON THE POWER BOARD TO THE
REAR PANEL
2 USED TO FIX ABOVE BOLTS
2 USED TO FIX ABOVE BOLTS
2 FIX TO THE CORRECT SURFACES
FOR LID
2 FIX TO THE CORRECT SURFACES
FOR LID
1 POSITIONON TOP OF THE
PRODUCT
8 TO AFFIX TOP PANEL TO PLASTIC
INSERTS, SIDE, REAR AND FRONT
PANEL
8