Main Assembly Bom (Silver Unit) - Cambridge Audio 640C Service Manual

Cambridge Azur 640CCD Player (Main Assembly BOM Silver Unit)
AP Part No. DRAWING
NO
AP13504/1 POLY ENDCAP PACKAGING
AP13505/1 CARTON PACKAGING W/HANDLE
AP13613/1 CAMBRIDGE AUDIO AZUR WOVEN BAG FOR REMOTE CONTROL
CAMBRIDGE AZUR REMOTE CONTROL COMPLETE. MODEL No RC-
540AC/640AC
AAA ALKALINE BATTERIES
PY566 AP14004/1 640C CD PLAYER OWNERS' MANUAL
AP13945/1 CARTON LABEL (MODEL NO.) UK SILVER
SERIAL NUMBER LABEL, BLANK (6.5X35.5mm)
ISO 9002 LABEL
AP10087/2 "MADE UNDER LICENCE IN PRC" STICKER
POLYBAG 173X260X4C mm
AP13612/1 CAMBRIDGE AUDIO AZUR 2 RIDGE WOVEN BAG
1830mm AC IEC POWER CORD SET BS STANDARD FUSED 3 AMP
BLUE TAPE SEAL FOR CAMBRIDGE CARTON
FRONT PANEL ASSEMBLY
PY586 AP12741/1 CAMBRIDGE NEW RANGE CD FRONT PANEL (PUNCHED AND PRINTED)
(SILVER)
AP12935/1 CAMBRIDGE NEW RANGE IR LENS
AP13322/1 CAMBRIDGE NEW RANGE 105mm DISPLAY WINDOW
AP13436/2 CAMBRIDGE NEW RANGE CD SUB PANEL LEFT (POWER)
AP12931/1 CAMBRIDGE NEW RANGE AMP LIGHTGUIDE, CUT TO SINGLE PIPE
M3 X 6 POZI PAN STP SCREW
M3 X 6 C/S POZI MACHINE SCREW
AP13585/1 CAMBRIDGE NEW RANGE AMP 9mm TAC SWITCH CUSHION
PY145 AP11782/1 OPUS CONTROL BOX BUTTON (SILVER)
AP13437/2 CAMBRIDGE NEW RANGE CD SUB PANEL RIGHT (FUNCTION)
M3 X 6 C/S POZI MACHINE SCREW
AP12934/1 CAMBRIDGE NEW RANGE AMP 7mm TAC SWITCH CUSHION
AP12925/1 CAMBRIDGE NEW RANGE AMP 7mm TAC SWITCH BUTTON
Note, resistors, capacitors and other 'generic' electronic components are not usually stocked by the manufacturer. Please obtain these locally.
DESCRIPTION
AP13752/3
QTY COMMENTS
2
1 PRINTED TO ARTWORK AP13716/1
1 PACK REMOTE CONTROL INSIDE,
1 MOUNTED INTO POLY ENDCAP
PACKING IN REBATE PROVIDED
3 FOR REMOTE. PLACE IN
INSTRUCTION MANUAL POLYBAG
1
1 FOR BOX
3 1 X REAR PANEL, 1 X BOX, 1 X
SHIPPING CARTON
1 AFFIXED TO REAR PANEL ABOVE
IEC SOCKET
1 AFFIXED TO REAR PANEL BELOW
IEC SOCKET
1 FOR INSTRUCTION
MANUALOWNERS CERTIFICATE
AND REMOTE BATTERIES
1 PACK AMP UNIT INSIDE
1 MUST BE BS APPROVED
1
1 SCREENED WITH ARTWORK
AP13591/3 & AP13593/1
1 GLUED IN PLACE ON THE FRONT
PANEL
1 GLUED IN PLACE ON THE FRONT
PANEL
1 FASTENEND IN PLACE INBETWEEN
THE LEDGES ON THE FRONT
PANEL, ALIGN UP THE POWER
BUTTON HOLES
1 FASTEN TO SUBPLATE LEFT
(POWER)
1 AFFIXES SINGLE LIGHTGUIDE TO
SUBPLATE
4 FASTEN THE SUB PLATE LEFT TO
THE FRONT PANEL
1 POSITION ON THE CONTROL BOX
BUTTON, DOWN THE MAIN SHAFT
AFFIX USING ADHESIVE PROVIDED
ON THE CUSHION.
1 POSITION IN PLACE ON THE
FRONTPANEL
1 FASTENEND IN PLACE INBETWEEN
THE LEDGES ON THE FRONT
PANEL, ALIGN UP THE FUNCTION
BUTTON HOLES
4 FASTEN THE SUB PLATE RIGHT TO
THE FRONT PANEL
5 POSITION ON THE 7mm TACT
SWITCH BUTTONS, DOWN THE
MAIN SHAFT AFFIX USING
ADHESIVE PROVIDED ON THE
CUSHION.
5 POSITION IN PLACE ON THE
FRONTPANEL
6