Accessories - Gilson SS-12R Operating Manual

Gilson Company, Inc.

8.6 Accessories

SSA-809 shown on SS-12R with Sieves
Description
EZ-Clamp Upgrade Kit replaces the original clamping assemblies on older Gilson Tapping Sieve
Shakers. Knurled knobs with push-button release, and slide freely up and down the clamp rods for
smooth, easy clamping. Once in position, a quick twist tightly secures the sieve stack. When the test
is complete, push the EZ-Clamp button and raise just enough to remove the stack. Upon release
of the button, the clamps stay in place, ready for the next test. EZ-Clamp kits include free-sliding
push-button knobs, an integral sieve cover and new clamp rods.
Gilson Sound Enclosure controls noise and dust associated with SS-8R and SS-12R Sieve
Shakers and other lab equipment. Sturdy painted steel case with full-width hinged doors is lined with
1in (25.4mm) of sound-attenuating foam. Outside Dimensions: 31x19x46in (800x500x1,200mm),
WxDxH. Est. Ship Wt.: 75lb (34kg).
Clean-N-Stor accessories are handy, time-saving devices for emptying, cleaning and weighing
functions associated with sieving operations. Inverting an 8in or 200mm sieve on the stainless
steel funnel allows quick emptying and cleaning of contents into a receiving scoop or pan. A
sieve stack can also be stored on top of the funnel. A scoop and soft-bristle cleaning brush are
included with all models. The SSA-801 attaches to the top of the SS-8R case. SSA-802 is a
stand-alone model that can be positioned directly over an electronic balance, so sieve fractions
can be weighed as the sieve is being cleaned. OBA-15R is an adjustable-height Clean-N-Stor
version designed to fit over taller balances.
Platform Adapters permit smaller diameter sieves to be used in SS-8R and SS-12R Gilson
Tapping Sieve Shakers. Each adapter is designed to compensate for weight differences as well
as frame diameter. SSA-810 and SSA-811 fit either sieve shaker, and must be used in conjunction
with the included adapter when using with the SS-12R. The SSA-812 for 10in (254mm) sieves is
for use with the SS-12R only.
SSA-807
ACCESSORIES
EZ-Clamp Upgrade Kit for SS-15
EZ-Clamp Upgrade Kit for SS-8R
EZ-Clamp Upgrade Kit for SS-12R
Clean-N-Stor Attachment for SS-8R
Adjustable-Height Clean-N-Stor
Platform Adapter for 3in (76.2mm) Sieves
Platform Adapter for 6in (152.4mm) Sieves
Platform Adapter for 10in (254mm) Sieves
Model
SSA-806
SSA-807
SSA-809
SSA-805R
SSA-801
Stand-Alone Clean-N-Stor
SSA-802
OBA-15R
SSA-810
SSA-811
SSA-812
Page 15
Gilson Sieve Shaker: SS-8R & SS-12R
SSA-805R shown with SS-12R & Sieves
SSA-801 shown with Sieves
on SS-8R
SSA-802 shown with Sieve
SSA-811 shown with Sieves