Advertisement
4
STEP
C.
After restarting your computer, launch the
REALTEK USB Wireless LAN Utility found in your
A.
After installing the software, you may now proceed
desktop; the Utility icon
will appear in your
to hardware installation by inserting the WL593USB
system tray.
to any of the USB ports of your computer.
NOTE: The adapter tray's icon indicates the
connection status received by your WL593USB
adapter:
•
If the icon
is green, a wireless connection
has been established.
5
STEP
•
If the icon
is red, there is no connection.
A.
Launch the Realtek USB Wireless LAN Utility by
double-clicking on the icon located on the desktop,
or by clicking on the utility icon found at the System
Tray.
Hardware Installation
B.
On the Wireless LAN Utility, click on the 'Available
Network' tab and then select the Wireless Access
Point you wish to connect to.
C.
After selecting the Wireless AP you will connect to,
click the 'Add to Profile' button.
The Wireless Network Properties window would
appear.
Connect to a Wireless AP
D.
On the 'Network Key' and 'Confirm Network Key'
input box, input the Wireless AP's password.
F.
Determine if you have successfully connected
to the Wireless AP. The 'Status' setting in the
E.
Click the 'OK' button to apply.
General tab should display "Associated", and the
After connecting successfully to the Wireless
'Signal Strength' and 'Link Quality' bars would be
GREEN in color.
Access Point, you will be redirected to the General
Tab of the Wireless LAN Utility.
Wireless Utility Tabs
For a brief understanding about the functions of
the Wireless Utility, each tab of the Wireless Utility
has been carefully provided below :
•
General. Displays the status of the current
connection SSID, its encryption, MAC address
and the Quality of the connection.
•
Profile. In this tab, you can add, edit, duplicate
and remove profiles from your profile list.
•
Available Network. Displays the list of available
Wireless APs in range.
•
Status. Shows a detailed information about
your current connection.
•
Wi-Fi Protect Setup (WPS). Allows you to
determine the method of WPS Connection
(PBC and PIN Configuration).
Advertisement
