Advertisement
Overview
The EVOS
FL and EVOS
™
Systems have two types of controls: manual
and onscreen. Manual controls include the the
stage X–Y axis knobs, focusing knobs, objective
selection wheel, phase annuli selector, and the
light cube selection lever. Onscreen controls are
located in the control bar at the bottom of the
display screen. The channel bar at the top of the
display screen shows the selected light cube or
transmitted light position.
CAUTION! UV HAZARD. Avoid exposure
to light beam and use protective shields.
NEVER look directly at UV light!
Basic Operation
Note: For detailed instructions, refer to the
EVOS
FL Imaging System User Guide (Pub. No.
™
MAN0007988), which is provided on the USB
flash drive. You can also dowload it from the
EVOS
FL Imaging System product page at
™
thermofisher.com.
1.
Turn on the instrument using the power
switch
on the right side of the base.
2.
Plug a USB flash drive into one of the USB
ports
on the right side of the instrument.
3.
Place the sample
vessel holder if
needed.
4.
Set magnification with the objective selection
wheel
on the front of the instrument.
5.
Pull the light cube selection lever
way toward the front of the instrument. The
channel bar will highlight the "Transmitted"
position.
FL Color Imaging
™
on the stage, using a
all the
4
2
Channel bar
Control bar
2
3
1
5
Advertisement
