Assembling Your Hover-1 Buggy - Hover-1 Buggy Operation Manual

ASSEMBLING YOUR HOVER-1 BUGGY

If you have questions or concerns about any of these steps, please feel free to contact our Customer Service
Team at support@Hover-1.com. Someone will be in touch to walk you through these steps.
Carefully follow the steps shown on the following pages for assembling the Hover-1 Buggy.
Remove all Hover-1 Buggy contents from the box. Ensure all contents from the "Parts List" section are
accounted for.
1. Locate the 4 foam pads and both handle bars. Remove the adhesive backing from each foam pad and
center to each side of the papal mounts as shown below. Ensure all of the foam pads are prosperity adhered
to pedal mounts.
6