Table of Contents
Advertisement
Section 11: Tools
This section explains how to use your phone's Tools.
In Standby mode, select Menu
Voice Service
Your r900 includes state-of-the-art voice recognition software
that lets you use your voice to dial numbers, access your
Contacts list, and open Tools. To access your phone's voice
recognition, do the following:
At the Tools menu, select Voice Service. The following
1.
options appear in the display:
• Voice Commands — Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
into your phone.
• Voice Settings — Lets you tailor VoiceSignal to better respond to
your voice and your phone use preferences.
Select the desired sub-menu.
2.
Voice Commands
To access the Voice Commands menu:
In Standby mode, press the Voice Recognition key (
1.
on the left side of the phone.
– or –
Main Menu 2
Tools.
),
From the Tools menu, select Voice Service
Voice Commands.
Tip: You can set your phone to launch Voice Service when you connect a
headset to the phone. For more information, refer to "Voice Launch" on
page 69.
"Say a Command" appears in the display and is
pronounced through the earpiece, followed by a list of
available commands:
• Call <Name or #> — Lets you dial the phone by saying any name
stored in your contact list, without ever having to record, or "train"
that name. VoiceSignal automatically voice-activates all your
contacts, even if you have hundreds of them stored on your phone.
You can also dial any telephone number, even if it is not stored in
your contact list, by saying the digits in the number.
• Send Text <Name or #> — Lets you access the Text Message
composer.
• Send Picture <Name or #> — Lets you access the Picture
Message composer.
• Send Video <Name or #> — Lets you access the Video Message
composer.
• Lookup <Name> — Lets you find a Contact by name and review
the Contact's information.
Tools
66
Advertisement
Table of Contents
