Table of Contents
Advertisement
Making a Call from Contacts
You can store phone numbers and contact names in your phone's
Contacts list. To call one of your contacts, do the following:
From Standby mode, touch Dialer. The touch keypad
1.
screen appears in the display.
Touch Contacts. The Contacts list appears in the display.
2.
3.
Touch
to place a call to the contact's default number.
Making a Call using Favorites
You can use Favorites to speed dial your Favorites' assigned 1- or
2-digit speed dial number.
Note: To use Favorites to dial contacts, you must enable Speed Dial in Phone
Settings. For more information, refer to "Speed Dial" on page 85.
1.
From Standby mode, touch Dialer to display the touch
keypad.
Touch the digits of the Favorite number, holding down the
2.
last digit until the phone dials the phone number.
Example: For 1-digit Favorite numbers, touch and hold the digit.
For 2-digit Favorites, touch the first digit and hold the second digit.
Making a Call with Voice Commands
Your phone includes state-of-the-art voice recognition software
that lets you dial numbers using your voice. Use Voice
Commands to dial any number stored in your Contacts list by
saying the name of the contact or the telephone number.
Tip: Wait for the beep before speaking.
Speak clearly at a normal volume, as if you were talking to someone on
the phone.
When saying a name, say it exactly how it appears in Contacts.
Dialing a Name
In Standby mode, press the Voice Recognition key (
1.
on the left side of the phone.
At the prompt "Say a Command", say "Call".
2.
At the prompt "Say the name or #", clearly say a contact
3.
name from your Contacts list, exactly as it appears.
If the name is recognized, Voice Commands repeats the
4.
name and dials the number.
If Voice Commands does not recognize the contact, it says
5.
"Call?" and a list of up to three names. Do one of the
following:
• Touch a name from the list.
)
Call Functions
22
Advertisement
Table of Contents
