Table of Contents
Advertisement
• Say "Yes" to confirm the first name.
• Say "No" to hear the next name.
• Say "Repeat" to hear the names again.
• Say "Cancel" to exit Voice Service without dialing.
If the contact has multiple numbers stored, Voice
6.
Commands displays the choices and prompts "Which
location?" Say the number type, from "Mobile 1", "Mobile
2" "Home 1", "Work 1", or "Fax 1".
Voice Commands dials the number.
7.
Dialing a Number
In Standby mode, press the Voice Recognition key (
1.
At the prompt "Say a Command", say "Call".
2.
At the prompt "Say the name or #", clearly speak a
3.
telephone number.
If Voice Commands recognizes the number, Voice Dial
4.
repeats and dials the number.
If Voice Commands does not recognize the number, it
5.
displays and prompts you with "Call?" followed by a list of
up to three numbers. Do one of the following:
• Press one of the number buttons.
• Say "Yes" to confirm the first number.
• Say "No" to hear the next number.
23
• Say "Repeat" to hear the numbers again.
• Say "Cancel" to exit Voice Commands without dialing.
Answering a Call
Your phone notifies you of a call in the following ways:
A ringtone sounds and/or your phone vibrates (depending on your
•
volume settings).
A phone number (unless blocked by the caller) and a name appear in
•
the display (If the caller's number and name are stored in your
Contacts list).
Answering an Incoming Call
).
Your phone offers multiple ways to answer incoming calls:
With the phone open or closed, touch Answer.
•
With the phone open or closed, press
•
Slide phone open to answer the call in Speakerphone mode.
•
Tip: These are default settings. You can set your phone to answer calls
automatically or when you press any key. For more information, refer to
"Call Settings" on page 84.
Ignoring a Call
You can Ignore an incoming call, and forward it directly to
voicemail:
•
Touch Ignore.
During an incoming call, press
•
.
.
Advertisement
Table of Contents
