Wireless Enrollment; Factory Reset - Alarm.Com ADC-V622 Quick Installation Manual

W I R E L E S S E N R O L L M E N T
Blue | Flashing
WPS Mode
To enter WPS mode, push the Menu button
and use the Volume buttons to scroll to
WPS Mode. See instructions above to add
the camera to your router and account
using WPS mode.
White | Flashing
AP Mode
To enter AP mode, push the Menu button
and use the Volume buttons to scroll to
AP Mode. See instructions above to add
the camera to your router and account
using AP mode.
Yellow | Flashing
Bluetooth pairing
To pair with Bluetooth, push the Menu
button and use the Volume buttons to
scroll to Bluetooth Mode.
7 | ADC-V622 180° Camera with Digital Pan / Tilt / Zoom
FAC T O R Y R E S E T
Red & Green | Flashing

Factory Reset

Warning: This will restore factory-default settings to the
camera. If already installed, the camera may need to be removed
from the Alarm.com account and re-added after a factory reset.
To perform a factory reset, push the Menu button and use the
Volume buttons to scroll to the Factory Reset option. Follow the
audio prompts to initiate Factory Reset.
Quick Installation Guide | 8