Led Reference Guide - Alarm.Com ADC-V622 Quick Installation Manual

4 Activate the WPS Mode on the router. The ADC-V622 will
begin to connect to the Wi-Fi network. The LED will be solid
green when the connection is complete.
5 Add the device to the account by either selecting the account
in MobileTech OR by using a web browser and entering the
following URL: www.alarm.com/addcamera
6 Select the camera from the video device list or type in its
MAC address to begin adding the camera. The camera's
MAC address is located on the back of the camera near
the power cable.
7 Follow the on-screen instructions to finish adding the
camera. You may configure camera settings from the
Customer Website.
You can now power down the camera and install it in its
final location using the included hardware.
5 | ADC-V622 180° Camera with Digital Pan / Tilt / Zoom

LED Reference Guide

S TAT U S
Green | Solid
Internet connection
Local network and internet connection
Green | Flashing
Local network connection
Local network connection only, no internet
Red | Solid
No network connection
No local network or internet connection
Red | Flashing
System booting
Camera is booting
Quick Installation Guide | 6