Page 1
180° CAMERA WITH DIGITAL PAN / TILT / ZOOM QUICK INSTALLATION GUIDE ADC-V622 SMARTER VIDEO SOLUTIONS...
Page 2
Menu Ethernet (PoE Capable) Volume Down Volume Up (Menu Scroll) (Menu Scroll) Power Call-Out Button Quick Installation Guide...
Page 3
MAC address is located on the back of the camera near the power cable. There are three options for connecting the ADC-V622 to the network: Ethernet Mode, Wi-Fi Protected Setup (WPS) Mode, and Access Point (AP) Mode. Follow the on-screen instructions to finish adding the camera.
Page 4
“ADC-V622 (XX:XX:XX)” where XX:XX:XX is the last six digits a non-switched outlet. of the ADC-V622’s MAC address, which is located on the back of the device near the power cord. Press the Menu button and use the Volume buttons to scroll...
Page 5
LED Reference Guide Activate the WPS Mode on the router. The ADC-V622 will begin to connect to the Wi-Fi network. The LED will be solid green when the connection is complete. S TAT U S Add the device to the account by either selecting the account...
Page 6
AP mode. Yellow Flashing Bluetooth pairing To pair with Bluetooth, push the Menu button and use the Volume buttons to scroll to Bluetooth Mode. ADC-V622 180° Camera with Digital Pan / Tilt / Zoom Quick Installation Guide...
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Visit: www.alarm.com/supportcenter This device is restricted to indoor use. ADC-V622 180° Camera with Digital Pan / Tilt / Zoom Quick Installation Guide...
Page 8
5 GHz the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or Frequency: 5150-5250 MHz damage to LE-LAN devices. Output Power: 22.86 dBm/mW ADC-V622 180° Camera with Digital Pan / Tilt / Zoom Quick Installation Guide...
Need help?
Do you have a question about the ADC-V622 and is the answer not in the manual?
Questions and answers